SDXCR1010F-07 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN1010K-07 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL1010K-07 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR1010K-07 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR1212K-11 Right hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL1212K-11 Left hand MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN1212K-11 (Neutral) MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR1616K-11 Right hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL1616K-11 Left hand MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN1616K-11 (Neutral) MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR2020K-11 Right hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL2020K-11 Left hand MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN2020K-11 (Neutral) MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR2525M-11 Right hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL2525M-11 Left hand MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN2525M-11 (Neutral) MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDXCR1010F-07 Right hand SDXCR1010F-07 Right hand Useful tool for Myford and other small lathes. Turn, face, profile and bore with one tool. 10mm SHANK 80mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN1010K-07 (Neutral) SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL1010K-07 Left hand SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR1010K-07 Right hand SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT070204HQ For general Machining. 0.4 nose radius. DCMT070208HQ For general machining. 0.8 nose radius DCGX070204AL For non ferrous. MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR1212K-11 Right hand SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL1212K-11 Left hand SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN1212K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 12mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $51.75 inc. GST MSRP: Now: $45.00 ex. GST Add to Cart SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR1616K-11 Right hand SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL1616K-11 Left hand SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN1616K-11 (Neutral) SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 16mm SHANK 125mm LONG Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose... MSRP: Was: Now: $56.35 inc. GST MSRP: Now: $49.00 ex. GST Add to Cart SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR2020K-11 Right hand SDJCR2020K-11 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL2020K-11 Left hand SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDNCN2020K-11 (Neutral) SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 20mm SHANK 125mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $79.35 inc. GST MSRP: Now: $69.00 ex. GST Add to Cart SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCR2525M-11 Right hand SDJCR2525M-11 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose radius DCGX11T308AL Non... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected × OK
SDJCL2525M-11 Left hand SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ General machining. 0.8 nose radius DCGX11T304AL Non ferrous. 0.4 nose... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected
SDNCN2525M-11 (Neutral) SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of imagination) 25mm SHANK 150mm LONG Insert not included. Applicable insert examples. DCMT11T304HQ General Machining. 0.4 nose radius DCMT11T308HQ... MSRP: Was: Now: $90.85 inc. GST MSRP: Now: $79.00 ex. GST Add to Cart Compare Selected
