Shop by Category

CARBIDE DRILLS

  • SOLID CARBIDE CENTRE DRILL 3mm (BS1)

    SOLID CARBIDE CENTRE DRILL 3mm (BS1)

    SOLID CARBIDE CENTRE DRILL 3mm (BS1) Body Diameter              3mm Drill Diameter                1.25mm Length...

    $36.80 inc. GST
    $32.00 ex. GST
    Add to Cart
  • SOLID CARBIDE CENTRE DRILL 8mm (BS4)

    SOLID CARBIDE CENTRE DRILL 8mm (BS4)

    SOLID CARBIDE CENTRE DRILL 8mm (BS4) Body Diameter              8mm Drill Diameter                3.15mm Length...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • 1mm CARBIDE STUB DRILL

    1mm CARBIDE STUB DRILL

    1mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $10.70 inc. GST
    $9.30 ex. GST
    Add to Cart
  • 1.5mm CARBIDE STUB DRILL

    1.5mm CARBIDE STUB DRILL

    1.5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $11.67 inc. GST
    $10.15 ex. GST
    Add to Cart
  • 2mm CARBIDE STUB DRILL

    2mm CARBIDE STUB DRILL

    2mm Carbide stub drill TiSiN coated Suitable mainly for steels up TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand...

    $13.57 inc. GST
    $11.80 ex. GST
    Add to Cart
  • 2.5mm CARBIDE STUB DRILL

    2.5mm CARBIDE STUB DRILL

    2.5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $17.02 inc. GST
    $14.80 ex. GST
    Add to Cart
  • 3mm CARBIDE STUB DRILL

    3mm CARBIDE STUB DRILL

    3mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $20.70 inc. GST
    $18.00 ex. GST
    Add to Cart
  • 3.3mm CARBIDE STUB DRILL

    3.3mm CARBIDE STUB DRILL

    3.3mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $24.15 inc. GST
    $21.00 ex. GST
    Add to Cart
  • 3.5mm CARBIDE STUB DRILL

    3.5mm CARBIDE STUB DRILL

    3.5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $24.15 inc. GST
    $21.00 ex. GST
    Add to Cart
  • 3.7mm CARBIDE STUB DRILL

    3.7mm CARBIDE STUB DRILL

    3.7mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $28.18 inc. GST
    $24.50 ex. GST
    Out of stock
  • 4mm CARBIDE STUB DRILL

    4mm CARBIDE STUB DRILL

    4mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $28.18 inc. GST
    $24.50 ex. GST
    Add to Cart
  • 4.2mm CARBIDE STUB DRILL

    4.2mm CARBIDE STUB DRILL

    4.2mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $33.01 inc. GST
    $28.70 ex. GST
    Add to Cart
  • 4.5mm CARBIDE STUB DRILL

    4.5mm CARBIDE STUB DRILL

    4.5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $33.01 inc. GST
    $28.70 ex. GST
    Add to Cart
  • 5mm CARBIDE STUB DRILL

    5mm CARBIDE STUB DRILL

    5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $37.95 inc. GST
    $33.00 ex. GST
    Add to Cart
  • 5.1mm CARBIDE STUB DRILL

    5.1mm CARBIDE STUB DRILL

    5.1mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $42.55 inc. GST
    $37.00 ex. GST
    Out of stock
  • 5.5mm CARBIDE STUB DRILL

    5.5mm CARBIDE STUB DRILL

    5.5mm Carbide stub drill UNIX coated. SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand...

    $42.55 inc. GST
    $37.00 ex. GST
    Add to Cart
  • 6mm CARBIDE COOLANT DRILL

    6mm CARBIDE COOLANT DRILL

    6mm Carbide drill with through coolant. TiAlN coated Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held drills or even...

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • 6mm CARBIDE STUB DRILL

    6mm CARBIDE STUB DRILL

    6mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $47.61 inc. GST
    $41.40 ex. GST
    Add to Cart
  • 6.5mm CARBIDE STUB DRILL

    6.5mm CARBIDE STUB DRILL

    6.5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $53.48 inc. GST
    $46.50 ex. GST
    Add to Cart
  • 6.8mm CARBIDE STUB DRILL

    6.8mm CARBIDE STUB DRILL

    6.8mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $59.34 inc. GST
    $51.60 ex. GST
    Add to Cart
  • 7mm CARBIDE STUB DRILL

    7mm CARBIDE STUB DRILL

    7mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $59.34 inc. GST
    $51.60 ex. GST
    Add to Cart
  • 7.5mm CARBIDE STUB DRILL

    7.5mm CARBIDE STUB DRILL

    7.5mm Carbide stub drill UNIX coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $67.05 inc. GST
    $58.30 ex. GST
    Add to Cart
  • 8mm CARBIDE STUB DRILL

    8mm CARBIDE STUB DRILL

    8mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • 8.5mm CARBIDE STUB DRILL

    8.5mm CARBIDE STUB DRILL

    8.5mm Carbide stub drill, coated. SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $83.61 inc. GST
    $72.70 ex. GST
    Add to Cart
  • 9mm CARBIDE STUB DRILL

    9mm CARBIDE STUB DRILL

      9mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand...

    $92.35 inc. GST
    $80.30 ex. GST
    Add to Cart
  • 9.5mm CARBIDE STUB DRILL

    9.5mm CARBIDE STUB DRILL

    9.5mm Carbide stub drill UNIX coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $102.01 inc. GST
    $88.70 ex. GST
    Add to Cart
  • 10mm CARBIDE STUB DRILL

    10mm CARBIDE STUB DRILL

    10mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $113.28 inc. GST
    $98.50 ex. GST
    Add to Cart
  • 10.5mm CARBIDE STUB DRILL

    10.5mm CARBIDE STUB DRILL

    10mm Carbide stub drill UNIX coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $123.05 inc. GST
    $107.00 ex. GST
    Add to Cart
  • 12mm CARBIDE STUB DRILL

    12mm CARBIDE STUB DRILL

    12mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $159.85 inc. GST
    $139.00 ex. GST
    Add to Cart
  • 12.5mm CARBIDE STUB DRILL

    12.5mm CARBIDE STUB DRILL

    12.5mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand...

    $171.35 inc. GST
    $149.00 ex. GST
    Out of stock
  • 13mm CARBIDE STUB DRILL

    13mm CARBIDE STUB DRILL

    13mm Carbide stub drill TiAlN coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $182.85 inc. GST
    $159.00 ex. GST
    Add to Cart
  • 14mm CARBIDE STUB DRILL

    14mm CARBIDE STUB DRILL

    14mm Carbide stub drill UNIX coated SUITABLE FOR STEELS UP TO 52 HRC Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $156.40 inc. GST
    $136.00 ex. GST
    Out of stock
  • 6.8mm CARBIDE JOBBER DRILL

    6.8mm CARBIDE JOBBER DRILL

    6.8mm Carbide jobber drill. UNIX coated Suitable for most materials. SHANK                6...

    $54.05 inc. GST
    $47.00 ex. GST
    Add to Cart
  • 10mm CARBIDE JOBBER DRILL

    10mm CARBIDE JOBBER DRILL

    10mm Carbide jobber drill. UNIX coated Suitable for most materials. Carbide drills can be brittle and likely to chip or break if used incorrectly. Used mostly for production drilling with rigid machines and tool holders. Not usually used in hand held...

    $111.55 inc. GST
    $97.00 ex. GST
    Add to Cart