Shop by Category

ALUMINIUM INSERTS

Inserts for aluminium turning.
  • RCGT0602M0-AK (NON FERROUS)

    RCGT0602M0-AK (NON FERROUS)

    RCGT0602M0 AL 6mm diameter Suits tools below SRACR1010K06 SRACR1212K06 SRACR1616K06 SRACR2020K06 SRACR2525K06    

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • RCGT0803M0 AL (NON FERROUS)

    RCGT0803M0 AL (NON FERROUS)

    RCGT0803M0 AL 8mm diameter Suits tools below   SRACR1212K08 SRACR1616K08 SRACR2020K08 SRACR2525M08  

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • TPUR160304L (NON FERROUS)

    TPUR160304L (NON FERROUS)

    TPUR160304L YD101 Left hand insert. 0.4mm radius. Left hand insert suitable for boring bars. Sharp ground insert for aluminium and plastics. Fits same tools and boring bars as TPMR160304 S25X-CTUPR16-34 S32S-CTUPR16-43 S40X-CTUPR16-50

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • TPUR160308R (NON FERROUS)

    TPUR160308R (NON FERROUS)

    TPUR160308R YD101 Right hand insert. 0.8mm radius. Sharp ground insert for aluminium and plastics. Fits same right hand tools as TPMR160308 Fits milling cutters using TPKN16, TPKR16 or TPMR16 inserts

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • TPUR160304R (NON FERROUS)

    TPUR160304R (NON FERROUS)

    TPUR160304R YD101 Right hand insert. 0.4mm radius. Sharp ground insert for aluminium and plastics. Fits same right hand tools as TPMR160304 Fits milling cutters using TPKN16, TPKR16 or TPMR16 inserts

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • SCGT09T304-AL (NON FERROUS)

    SCGT09T304-AL (NON FERROUS)

    SCGT09T304-AL   0.4mm corner radius Suitable for aluminium, plastic and other soft materials. Suits tools below. SSSCR1212K09 SSSCR1616K09 SSSCR2020K09 SSSCR2525K09

    $9.89 inc. GST
    $8.60 ex. GST
    Add to Cart
  • TNMG160404 AH (NON FERROUS)

    TNMG160404 AH (NON FERROUS)

    Roughing aluminium and other soft materials.   Kyocera Japan. TNMG160404 AH (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake AH chip breaker for aluminium roughing.Suits turning tools including those below Suits...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • TNGG160408R-A3 KW10 (NON FERROUS)

    TNGG160408R-A3 KW10 (NON FERROUS)

      Machining of aluminium and plastic. Kyocera Japan. TNGG160408R-A3 KW10 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake sharp ground  breaker for aluminium plastics and non ferrous. This is a right insert. R for...

    $13.11 inc. GST
    $11.40 ex. GST
    Add to Cart
  • TNGG160404L-A3 KW10 (NON FERROUS)

    TNGG160404L-A3 KW10 (NON FERROUS)

     Machining of aluminium and plastic.    Kyocera Japan. TNGG160404L-A3 KW10 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake sharp ground  breaker for aluminium plastics and non ferrous. This is a handed...

    $13.11 inc. GST
    $11.40 ex. GST
    Add to Cart
  • RCGX1003M0-AQ KW10 (NON FERROUS)

    RCGX1003M0-AQ KW10 (NON FERROUS)

    RCGX1003M0-AQ KW10 for aluminium and plastic. Sharp ground cutting edge for non ferrous materials. Round profiling insert 10mm Suits tools. PRXCR2020K-10 BUTTON TOOL PRXCR2525M-10 BUTTON TOOL 

    $10.81 inc. GST
    $9.40 ex. GST
    Add to Cart
  • TNGG160404R-A3 KW10 (NON FERROUS)

    TNGG160404R-A3 KW10 (NON FERROUS)

    Machining of aluminium and plastic. Kyocera Japan. TNGG160404R-A3 KW10 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake sharp ground  breaker for aluminium plastics and non ferrous. This is a right insert. R for right...

    $13.11 inc. GST
    $11.40 ex. GST
    Add to Cart
  • TNGG160408L-A3 KW10 (NON FERROUS)

    TNGG160408L-A3 KW10 (NON FERROUS)

    Machining of aluminium and plastic.    Kyocera Japan. TNGG160408L-A3 KW10 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake sharp ground  breaker for aluminium plastics and non ferrous. This is a handed insert...

    $13.11 inc. GST
    $11.40 ex. GST
    Add to Cart
  • TNMG160408 AH (NON FERROUS)

    TNMG160408 AH (NON FERROUS)

    Roughing aluminium and other soft materials.   Kyocera Japan. TNMG160408 AH (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) High rake AH chip breaker for aluminium roughing. Suits turning tools including those below. Right...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • DCGT070204-AG-CX10 (NON FERROUS)

    DCGT070204-AG-CX10 (NON FERROUS)

    DCGT070204-AG-CX10 These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

    $9.43 inc. GST
    $8.20 ex. GST
    Add to Cart
  • TCGX090204-AL (NON FERROUS)

    TCGX090204-AL (NON FERROUS)

    TCGX090204-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $7.82 inc. GST
    $6.80 ex. GST
    Add to Cart
  • TCGT110204 AG-CX10 (NON FERROUS)

    TCGT110204 AG-CX10 (NON FERROUS)

    TCGT110204 AG-CX10 These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

    $10.81 inc. GST
    $9.40 ex. GST
    Add to Cart
  • TCGX16T304-AL  (NON FERROUS)

    TCGX16T304-AL (NON FERROUS)

    TCGX16T304-AL  (NON FERROUS) These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are...

    $9.66 inc. GST
    $8.40 ex. GST
    Add to Cart
  • TCGX16T308-AL (NON FERROUS)

    TCGX16T308-AL (NON FERROUS)

    TCGX16T308-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $9.66 inc. GST
    $8.40 ex. GST
    Add to Cart
  • CCGT060204-AG (NON FERROUS)

    CCGT060204-AG (NON FERROUS)

    CCGT060204-AG These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.74 inc. GST
    $7.60 ex. GST
    Add to Cart
  • CCGT09T308-AL  (NON FERROUS)

    CCGT09T308-AL (NON FERROUS)

      CCGT09T308-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • CCGT09T304-AL (NON FERROUS)

    CCGT09T304-AL (NON FERROUS)

      CCGT09T304-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • CCGX120408 AL (NON FERROUS)

    CCGX120408 AL (NON FERROUS)

      CCGX120408 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • DCGX11T304-AL (NON FERROUS)

    DCGX11T304-AL (NON FERROUS)

    DCGX11T304-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • DCGX11T308-AL (NON FERROUS)

    DCGX11T308-AL (NON FERROUS)

    DCGX11T308-AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • VCGX110304 AL (NON FERROUS)

    VCGX110304 AL (NON FERROUS)

    VCGX110304 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • VCGX110308 AL (NON FERROUS)

    VCGX110308 AL (NON FERROUS)

    VCGX110308 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • VCGT160404 AG-CX10 (NON FERROUS)

    VCGT160404 AG-CX10 (NON FERROUS)

    VCGT160404 AG-CX10 These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited...

    $13.57 inc. GST
    $11.80 ex. GST
    Add to Cart
  • VCGX160408 AL (NON FERROUS)

    VCGX160408 AL (NON FERROUS)

    VCGX160408 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $13.57 inc. GST
    $11.80 ex. GST
    Add to Cart
  • VCGX160412 AL (NON FERROUS)

    VCGX160412 AL (NON FERROUS)

    VCGX160412 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart