Shop by Category

BORING BARS

Kyocera logo                                   e chain logo

  • Boring bar sleeve 16mm x 6mm

    Boring bar sleeve 16mm x 6mm

    Boring bar sleeve SHB-0616 Hold your small boring bars correctly using this precision sleeve. Flat top and bottom for alignment in your tool post, or hold directly in socket. Increased rigidity and less chatter. Increase inert life and improve surface...

    $44.85 inc. GST
    $39.00 ex. GST
    Add to Cart
  • Boring bar sleeve 20mm x 12mm

    Boring bar sleeve 20mm x 12mm

    Boring bar sleeve SHB-1220 Hold your small boring bars correctly using this precision sleeve. Flat top and bottom for alignment in your tool post, or hold directly in socket. Increased rigidity and less chatter. Increase inert life and improve surface...

    $44.85 inc. GST
    $39.00 ex. GST
    Add to Cart
  • Boring bar sleeve 20mm x 10mm

    Boring bar sleeve 20mm x 10mm

    Boring bar sleeve SHB-1020 Hold your small boring bars correctly using this precision sleeve. Flat top and bottom for alignment in your tool post, or hold directly in socket. Increased rigidity and less chatter. Increase inert life and improve surface...

    $44.85 inc. GST
    $39.00 ex. GST
    Add to Cart
  • Boring bar sleeve 20mm x 8mm

    Boring bar sleeve 20mm x 8mm

    Boring bar sleeve SHB-0820 Hold your small boring bars correctly using this precision sleeve. Flat top and bottom for alignment in your tool post, or hold directly in socket. Increased rigidity and less chatter. Increase inert life and improve surface...

    $44.85 inc. GST
    $39.00 ex. GST
    Add to Cart
  • Boring bar sleeve 16mm x 10mm

    Boring bar sleeve 16mm x 10mm

    Boring bar sleeve SHB-1016 Hold your small boring bars correctly using this precision sleeve. Flat top and bottom for alignment in your tool post, or hold directly in socket. Increased rigidity and less chatter. Increase inert life and improve surface...

    $44.85 inc. GST
    $39.00 ex. GST
    Add to Cart
  • Boring bar sleeve 16mm x 8mm

    Boring bar sleeve 16mm x 8mm

    Boring bar sleeve SHB-0816 Hold your small boring bars correctly using this precision sleeve. Flat top and bottom for alignment in your tool post, or hold directly in socket. Increased rigidity and less chatter. Increase inert life and improve surface...

    $44.85 inc. GST
    $39.00 ex. GST
    Add to Cart
  • S08K-SCLCR-06 8mm BORING BAR

    S08K-SCLCR-06 8mm BORING BAR

    S08K-SCLCR-06 A useful bar for boring and facing. Strong insert shape. Shank           8mm Length          125mm Minimum bore 10mm Inserts not included...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S25R-ETUNR16 (25mm x 200mm)

    S25R-ETUNR16 (25mm x 200mm)

    S25R-ETUNR16 Takes economical 6 edge insert. Shank                      25mm Minimum bore         ...

    $136.85 inc. GST
    $119.00 ex. GST
    Add to Cart
  • S25T-ETUNR16 (25mm x 300mm)

    S25T-ETUNR16 (25mm x 300mm)

    S25T-ETUNR16 Takes economical 6 edge insert. Shank                      25mm Minimum bore         ...

    $159.85 inc. GST
    $139.00 ex. GST
    Add to Cart
  • S32S-ETUNR16 (32mm x 250mm)

    S32S-ETUNR16 (32mm x 250mm)

    S32S-ETUNR16 32mm BORING BAR Takes economical 6 edge insert. Shank                    32mm Min...

    $221.95 inc. GST
    $193.00 ex. GST
    Add to Cart
  • S32U-ETUNR16 (32mm x 350mm)

    S32U-ETUNR16 (32mm x 350mm)

    S32U-ETUNR16 32mm BORING BAR Takes economical 6 edge insert. Shank                    32mm Min...

    $296.70 inc. GST
    $258.00 ex. GST
  • S40T-ETUNR16 (40mm x 300mm)

    S40T-ETUNR16 (40mm x 300mm)

    S40T-ETUNR16 40mm BORING BAR Takes economical 6 edge insert. Shank                    40mm Min...

    $316.25 inc. GST
    $275.00 ex. GST
    Add to Cart
  • S40W-ETUNR16 (40mm x 450mm)

    S40W-ETUNR16 (40mm x 450mm)

    Shipping to NZ only. Overseas customers please ask for shipping cost. S40W-ETUNR16 40mm BORING BAR Takes economical 6 edge insert. Shank                   ...

    $430.10 inc. GST
    $374.00 ex. GST
  • S06H-STUBR-06  6mm SHANK BORING BAR

    S06H-STUBR-06 6mm SHANK BORING BAR

      S06H-STUBR-06 Shank           6mm Length          100mm Minimum bore 8mm Applicable inserts (Not included) TBMT060104 (General machining) TBGT060102 (Sharp...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S60V-ETUNR16 (60mm x 400mm)

    S60V-ETUNR16 (60mm x 400mm)

    Shipping to NZ only. Overseas customers please ask for shipping cost. S60V-ETUNR16 60mm BORING BAR Takes economical 6 edge insert. Shank                   ...

    $511.75 inc. GST
    $445.00 ex. GST
    Add to Cart
  • S08K-STUPR-09  8mm SHANK BORING BAR

    S08K-STUPR-09 8mm SHANK BORING BAR

    S08K-STUPR09-10 Preferred by some, this bar has higher positive rake than the TCMT type bar .   Another advantage is the availability of TPGH inserts which are precision ground for high accuracy machining and low cutting force. Increase the...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S08K-STFCR09  8mm SHANK BORING BAR

    S08K-STFCR09 8mm SHANK BORING BAR

    S08K-STFCR09-10 Shank           8mm Length          125mm Minimum bore 10mm Insert not included. Applicable insert examples. TCMT090204 General...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S08K-SCLCL-06 8mm Left hand

    S08K-SCLCL-06 8mm Left hand

    S08K-SCLCL-06 Left hand A useful bar for boring and facing. Strong insert shape. Shank           8mm Length          125mm Minimum bore 10mm Inserts not included...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S10K-STFPR-11  10mm SHANK BORING BAR

    S10K-STFPR-11 10mm SHANK BORING BAR

    S10K-STFPR-11 Preferred by some, this bar has higher positive rake than the TCMT type bar .   Another advantage is the availability of TPGH inserts which are precision ground for high accuracy machining and low cutting force. Increase the...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S10K-SDUCR-07 10mm BORING BAR

    S10K-SDUCR-07 10mm BORING BAR

    S10K-SDUCR-07 10mm BORING BAR Ideal for internal profiling, back chamfering and under cuts. Applicable inserts. SHANK        10mm MIN BORE    13mm LENGTH      ...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S10K-SCLCR-06 10mm BORING BAR

    S10K-SCLCR-06 10mm BORING BAR

    S10K-SCLCR-06 A useful bar for boring and facing. Strong insert shape. Shank           10mm Length          125mm Minimum bore 12mm Inserts not included...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S10K-STFCR09 10mm SHANK BORING BAR

    S10K-STFCR09 10mm SHANK BORING BAR

    S10K-STFCR09 10mm shank boring bar. Shank           10mm Length          125mm Minimum bore 12mm Insert not included. Applicable insert examples. TCMT090204...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S10K-SDQCR-07 10mm BORING BAR

    S10K-SDQCR-07 10mm BORING BAR

    S10K-SDQCR-07 10mm BORING BAR Ideal for internal profiling, back chamfering and under cuts. SHANK        10mm MIN BORE    13mm LENGTH       125mm Inserts not included...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • A10K-SCLCR-06 10mm Through Coolant

    A10K-SCLCR-06 10mm Through Coolant

    A10K-SCLCR-06 A useful bar for boring and facing with through coolant. Strong insert shape. Shank           10mm Length          125mm Minimum bore 12mm Inserts...

    $81.65 inc. GST
    $71.00 ex. GST
    Add to Cart
  • A10X-SCLCR-06 10mm BORING BAR (Through coolant)

    A10X-SCLCR-06 10mm BORING BAR (Through coolant)

    A10X-SCLCR-06 A useful bar for boring and facing with through coolant. Strong insert shape. Shank           10mm Length          120mm Minimum bore 12mm Inserts...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S10K-SCLCL-06 10mm Left hand

    S10K-SCLCL-06 10mm Left hand

    S10K-SCLCL-06 Left hand A useful bar for boring and facing. Strong insert shape. Shank           10mm Length          125mm Minimum bore 12mm Inserts not included...

    $67.85 inc. GST
    $59.00 ex. GST
    Add to Cart
  • S12L-CTUPR09-16 12mm

    S12L-CTUPR09-16 12mm

    12mm KYOCERA TPMR BORING BAR. S12L-CTUPR09-16 Shank size      12mm Minimum bore  16mm Length           140mm Inserts not included. Applicable inserts. TPMR090204

    $125.35 inc. GST
    $109.00 ex. GST
    Add to Cart
  • S12M-STFPR-11  12mm SHANK BORING BAR

    S12M-STFPR-11 12mm SHANK BORING BAR

    S12M-STFPR-11 Preferred by some, this bar has higher positive rake than the TCMT type bar .   Another advantage is the availability of TPGH inserts which are precision ground for high accuracy machining and low cutting force. Increase the...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S12M-SDUCR-07 12mm BORING BAR

    S12M-SDUCR-07 12mm BORING BAR

    S12M-SDUCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts. Applicable inserts. SHANK        12mm MIN BORE    16mm LENGTH       150mm Inserts...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S12M-SCLCR06 12mm BORING BAR

    S12M-SCLCR06 12mm BORING BAR

    S12M-SCLCR06 A useful bar for boring and facing. Strong insert shape. Shank           12mm Length          150mm Minimum bore 14mm Inserts not included...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S12M-STFCR11 12mm SHANK BORING BAR

    S12M-STFCR11 12mm SHANK BORING BAR

    S12M-STFCR11 12mm Boring bar Shank           12mm Length          150mm Minimum bore 14mm Insert not included. Applicable insert examples. TCMT110204 General...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • A12M-SCLCR06 12mm Through Coolant

    A12M-SCLCR06 12mm Through Coolant

    A12M-SCLCR06 A useful bar for boring and facing with through coolant. Strong insert shape. Shank           12mm Length          150mm Minimum bore 14mm Inserts...

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • S12M-SDQCR-07 12mm BORING BAR

    S12M-SDQCR-07 12mm BORING BAR

    S12M-SDQCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts. Applicable inserts. SHANK        12mm MIN BORE    16mm LENGTH       150mm Inserts...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • A12X-SCLCR-06 12mm BORING BAR (Through coolant)

    A12X-SCLCR-06 12mm BORING BAR (Through coolant)

    A12X-SCLCR-06 A useful bar for boring and facing with through coolant. Strong insert shape. Shank           12mm Length          120mm Minimum bore 14mm Inserts...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S12M-SCLCR09 12mm BORING BAR

    S12M-SCLCR09 12mm BORING BAR

    S12M-SCLCR09 A useful bar for boring and internal facing. Strong insert shape. Shank           12mm Length          150mm Minimum bore 14mm Inserts not included...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S12M-SCLCL06 12mm Left hand

    S12M-SCLCL06 12mm Left hand

    S12M-SCLCL06 Left hand A useful bar for boring and facing. Strong insert shape. Shank           12mm Length          150mm Minimum bore 14mm Inserts not included...

    $75.90 inc. GST
    $66.00 ex. GST
    Out of stock
  • S12M-SCLCL09 12mm Left hand

    S12M-SCLCL09 12mm Left hand

    S12M-SCLCL09 Left hand A useful bar for boring and facing. Strong insert shape. Shank           12mm Length          150mm Minimum bore 14mm Inserts not included...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S14M-SCLCR09 14mm BORING BAR

    S14M-SCLCR09 14mm BORING BAR

    S14M-SCLCR09 A useful "in between size" bar for boring and internal facing. Strong insert shape. Shank           14mm Length          150mm Minimum bore...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S16Q-SDUCR-07 16mm BORING BAR

    S16Q-SDUCR-07 16mm BORING BAR

    S16Q-SDUCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts. Applicable inserts. SHANK        16mm MIN BORE    20mm LENGTH      ...

    $75.90 inc. GST
    $66.00 ex. GST
    Add to Cart
  • S16Q-STFPR-11  16mm SHANK BORING BAR

    S16Q-STFPR-11 16mm SHANK BORING BAR

    S16Q-STFPR-11 Preferred by some, this bar has higher positive rake than the TCMT type bar .   Another advantage is the availability of TPGH inserts which are precision ground for high accuracy machining and low cutting force...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16Q-SCLCR-06 16mm BORING BAR

    S16Q-SCLCR-06 16mm BORING BAR

    S16Q-SCLCR06 A useful bar for boring and facing. Strong insert shape. Shank           16mm Length          180mm Minimum bore 18mm Inserts not included...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16N-CTUPR11-20 16mm

    S16N-CTUPR11-20 16mm

    16mm KYOCERA TPMR BORING BAR. S16N-CTUPR11-20 Shank size      16mm Minimum bore  20mm Length           160mm Inserts not included. TPMR110304 Steel/Stainless TPMR110308...

    $136.85 inc. GST
    $119.00 ex. GST
    Add to Cart
  • S16Q-STFCR11 16mm SHANK BORING BAR

    S16Q-STFCR11 16mm SHANK BORING BAR

    S16Q-STFCR11 16mm Boring bar Shank           16mm Length          180mm Minimum bore 18mm Insert not included. Applicable insert examples. TCMT110204 General...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16Q-SCLCL-06 16mm Left hand

    S16Q-SCLCL-06 16mm Left hand

    S16Q-SCLCL06 Left hand A useful bar for boring and facing. Strong insert shape. Shank           16mm Length          180mm Minimum bore 18mm Inserts not included...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • A16Q-SCLCR-09 16mm Through Coolant

    A16Q-SCLCR-09 16mm Through Coolant

    A16Q-SCLCR09 A useful bar for boring and facing with through coolant. Strong insert shape. Shank           16mm Length          180mm Minimum bore 18mm Inserts...

    $97.75 inc. GST
    $85.00 ex. GST
    Add to Cart
  • S16Q-SDUCR-11 16mm BORING BAR

    S16Q-SDUCR-11 16mm BORING BAR

    S16Q-SDUCR-11 BORING BAR Ideal for internal profiling, back chamfering and under cuts. SHANK      16mm MIN BORE    20mm LENGTH     180mm Inserts not included. Applicable insert examples...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16Q-SCLCR-09 16mm BORING BAR

    S16Q-SCLCR-09 16mm BORING BAR

    S16Q-SCLCR09 A useful bar for boring and facing. Strong insert shape. Shank           16mm Length          180mm Minimum bore 18mm Inserts not included...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16Q-SCLCL-09 16mm Left hand

    S16Q-SCLCL-09 16mm Left hand

    S16Q-SCLCL09 Left hand A useful bar for boring and facing. Strong insert shape. Shank           16mm Length          180mm Minimum bore 18mm Inserts not included...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16Q-SDQCR-07 16mm BORING BAR

    S16Q-SDQCR-07 16mm BORING BAR

    S16Q-SDQCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts. SHANK      16mm MIN BORE    20mm LENGTH     180mm Inserts not included. Applicable inserts...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S16Q-SDQCR-11 16mm BORING BAR

    S16Q-SDQCR-11 16mm BORING BAR

    S16Q-SDQCR-11 BORING BAR Ideal for internal profiling, back chamfering and under cuts. SHANK      16mm MIN BORE    20mm LENGTH     180mm Inserts not included. Applicable insert examples...

    $79.35 inc. GST
    $69.00 ex. GST
    Add to Cart
  • S18Q-SCLCR-09 18mm BORING BAR

    S18Q-SCLCR-09 18mm BORING BAR

    S18Q-SCLCR09 A useful in between size bar for boring and internal facing. Can also be shortened for use in 75mm boring head with 18mm mounting hole. Strong insert shape. Shank          ...

    $87.40 inc. GST
    $76.00 ex. GST
    Out of stock
  • S18Q-SCLCL-09 18mm Left hand

    S18Q-SCLCL-09 18mm Left hand

    S18Q-SCLCL-09 18mm Left hand Can be used for boring large diameters when mounted horizontally in a 75mm boring head. Strong insert shape. Shank          ...

    $87.40 inc. GST
    $76.00 ex. GST
    Add to Cart