5/32 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
1/8 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
3/16 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
1/4 BSW HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/16 BSW HAND TAP SET MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
3/8 BSW HAND TAP SET MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
7/16 BSW HAND TAP SET MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
1/2 BSW HSS HAND TAP SET MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/8 X 11 WHITWORTH HAND TAP SET MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
3/4 X 10 WHITWORTH HAND TAP SET MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart 5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/32 BSW HAND TAP SET 5/32 x 32 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
1/8 BSW HAND TAP SET 1/8 x 40 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
3/16 BSW HAND TAP SET 3/16 x 24 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
1/4 BSW HAND TAP SET 1/4 x 20 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart 5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/16 BSW HAND TAP SET 5/16 x 18 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $42.55 inc. GST MSRP: Now: $37.00 ex. GST Add to Cart 3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
3/8 BSW HAND TAP SET 3/8-16 BSW HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $44.85 inc. GST MSRP: Now: $39.00 ex. GST Add to Cart 7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
7/16 BSW HAND TAP SET 7/16 x 14 BSW HAND TAP SET HSS HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE 5/8 X 11 WHITWORTH HAND TAP INTERMEDIATE MSRP: Was: Now: $34.50 inc. GST MSRP: Now: $30.00 ex. GST Add to Cart 1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
1/2 BSW HSS HAND TAP SET 1/2-12 BSW HSS Hand tap set. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $78.20 inc. GST MSRP: Now: $68.00 ex. GST Out of stock 9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
9/16 WHITWORTH HAND TAP TAPER 9/16 WHITWORTH HAND TAP TAPER MSRP: Was: Now: $46.00 inc. GST MSRP: Now: $40.00 ex. GST Add to Cart 5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected × OK
5/8 X 11 WHITWORTH HAND TAP SET 5/8 X 11 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $138.00 inc. GST MSRP: Now: $120.00 ex. GST Out of stock 3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected
3/4 X 10 WHITWORTH HAND TAP SET 3/4 X 10 WHITWORTH HAND TAP SET, HSS INCLUDES TAPER, INTERMEDIATE AND BOTTOMING TAPS MSRP: Was: Now: $184.00 inc. GST MSRP: Now: $160.00 ex. GST Add to Cart Compare Selected
