TNGA160412 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
CNGA120408 KT66 CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110304 CERAMIC MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110308 PT600M CERAMIC MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN160308 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TNGA160404 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TNGA160408 PT600M CERAMIC MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN090204 KT66 CERAMIC MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN160304 PT600M CERAMIC MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110308 KT66 CERAMIC MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110304 PT600M CERAMIC MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TNGA160412 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
CNGA120408 KT66 CERAMIC CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110304 CERAMIC TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $18.40 inc. GST MSRP: Now: $16.00 ex. GST Add to Cart TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110308 PT600M CERAMIC TPGN110308 PT600MCoated ceramic insert for hardened steel. Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened... MSRP: Was: Now: $16.56 inc. GST MSRP: Now: $14.40 ex. GST Add to Cart TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN160308 PT600M CERAMIC TPGN160308 PT600M Coated ceramic insertCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TNGA160404 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160404 PT600M Coated (0.4mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TNGA160408 PT600M CERAMIC Ceramic insert for hardened steel and cast iron. Kyocera Japan. TNGA160408 PT600M Coated (0.8mm CORNER RADIUS) Suits all brands of turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can... MSRP: Was: Now: $18.17 inc. GST MSRP: Now: $15.80 ex. GST Add to Cart TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN090204 KT66 CERAMIC TPGN090204-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.49 inc. GST MSRP: Now: $12.60 ex. GST Add to Cart TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN160304 PT600M CERAMIC TPGN160304 PT600MCoated ceramic insert for hardened steel. PT600M Coated ceramic is able to withstand very light intermittent cutting in hardened steel such as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on... MSRP: Was: Now: $20.70 inc. GST MSRP: Now: $18.00 ex. GST Add to Cart TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected × OK
TPGN110308 KT66 CERAMIC TPGN110308-T00820 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent... MSRP: Was: Now: $14.72 inc. GST MSRP: Now: $12.80 ex. GST Add to Cart TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected
TPGN110304 PT600M CERAMIC TPGN110304-T00820 PT600MCeramic insert for hardened steel and high speed machining of cast iron.PT600M Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces... MSRP: Was: Now: $21.85 inc. GST MSRP: Now: $19.00 ex. GST Compare Selected
