Shop by Category

MILLING INSERTS

  • APGT160408-AL (Aluminium)

    APGT160408-AL (Aluminium)

    APGT160408-AL Milling insert for aluminium, plastic and other soft materials. 0.8 corner radius Same fitting as APMT160408 16mm inserts. 50mm Face mill for APMT1604 63mm Face mill for APMT1604 80mm Face mill for APMT1604    

    $13.34 inc. GST
    $11.60 ex. GST
    Add to Cart
  • APKT100308PDER MG

    APKT100308PDER MG

    APKT100308PDER MG Milling insert Suitable for steel, stainless, and Cast iron.          

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • APKT113508-AL (Aluminium)

    APKT113508-AL (Aluminium)

    APKT113508-AL Milling insert for aluminium, plastic and other soft materials. 0.8 corner radius Suits cutters below and others using APMT1135 inserts.   16mm Inserted End Mill for APMT1135 20mm Inserted End Mill for APMT1135 25mm Inserted End...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • APKT113508PDFR-AL 10 Pack

    APKT113508PDFR-AL 10 Pack

    APKT113508PDFR-AL Milling insert for aluminium, plastic and other soft materials. 0.8 corner radius Suits cutters below and others using APMT1135 inserts.    16mm Inserted End Mill for APMT1135 20mm Inserted End Mill for APMT1135 25mm...

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • APKT160408PDER

    APKT160408PDER

    APKT160408PDER Milling insert Suitable for steel and stainless.          

    $10.81 inc. GST
    $9.40 ex. GST
    Add to Cart
  • APKT160408PDER 10 Pack

    APKT160408PDER 10 Pack

    APKT160408PDER Milling insert Suitable for steel and stainless.          

    $96.60 inc. GST
    $84.00 ex. GST
    Add to Cart
  • APMT103508PDER RG 10 PACK

    APMT103508PDER RG 10 PACK

    APMT103508PDER RG Milling insert, pack of 10. Suitable for steel, stainless, and Cast iron.          

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • APMT113508-MG (Winstar)

    APMT113508-MG (Winstar)

    APMT113508-MG Milling insert Suitable for most materials Suits cutters below and others using APMT1135 inserts.   16mm Inserted End Mill for APMT1135 20mm Inserted End Mill for APMT1135 25mm Inserted End Mill for APMT1135 25mm x 200mm...

    $10.35 inc. GST
    $9.00 ex. GST
    Add to Cart
  • APMT113508-MG 10 Pack

    APMT113508-MG 10 Pack

    APMT113508-MG Milling insert Suitable for most materials Suits cutters below and others using APMT1135 inserts.   16mm Inserted End Mill for APMT1135 20mm Inserted End Mill for APMT1135 25mm Inserted End Mill for APMT1135 25mm x 200mm...

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • APMT160408PDER

    APMT160408PDER

    APMT160408PDER Milling insert Suitable for steel and stainless. 50mm Face mill for APMT1604 63mm Face mill for APMT1604 80mm Face mill for APMT1604              

    $11.27 inc. GST
    $9.80 ex. GST
    Add to Cart
  • APMT160408PDER 10 Pack

    APMT160408PDER 10 Pack

    APMT160408PDER Milling insert Suitable for steel and stainless. 50mm Face mill for APMT1604 63mm Face mill for APMT1604 80mm Face mill for APMT1604            

    $103.50 inc. GST
    $90.00 ex. GST
    Add to Cart
  • BDGT11T302FR-JA GW25 Aluminium

    BDGT11T302FR-JA GW25 Aluminium

    BDGT11T302FR-JA GW25 (0.2mm corner radius) High rake ground cuttini edges for aluminium machining. Suits cutters MEC 16 20 25 40 50 63mm Suits cutters MEC 40 50 63mm Face Mill 16mm Ultra Hurricane End Mill 20mm Ultra Hurricane End Mill 25mm Ultra...

    $17.02 inc. GST
    $14.80 ex. GST
    Add to Cart
  • BDGT11T304FR-JA GW25 Aluminium

    BDGT11T304FR-JA GW25 Aluminium

    BDGT11T304FR-JA GW25 (0.4mm corner radius) High rake ground cuttini edges for aluminium machining. Suits cutters MEC 16 20 25 40 50 63mm Suits cutters MEC 40 50 63mm Face Mill 16mm Ultra Hurricane End Mill 20mm Ultra Hurricane End Mill 25mm Ultra...

    $17.02 inc. GST
    $14.80 ex. GST
    Add to Cart
  • BDGT11T308FR-JA GW25 Aluminium

    BDGT11T308FR-JA GW25 Aluminium

    BDGT11T308FR-JA GW25 (0.8mm corner radius) High rake ground cuttini edges for aluminium machining. Suits cutters MEC 40 50 63mm Face Mill 16mm Ultra Hurricane End Mill 20mm Ultra Hurricane End Mill 25mm Ultra Hurricane End Mill

    $17.02 inc. GST
    $14.80 ex. GST
    Add to Cart
  • BDMT070304ER-JS PR1225

    BDMT070304ER-JS PR1225

    BDMT070304ER-JS PR1225 High rake for low cutting force. PR1225 grade and JS chip breaker recommended for steel and stainless milling. Suits cutters MECX

    $13.80 inc. GST
    $12.00 ex. GST
    Add to Cart
  • BDMT070308ER-JS PR1225

    BDMT070308ER-JS PR1225

    BDMT070308ER-JS PR1225 High rake for low cutting force. PR1225 grade and JS chip breaker recommended for steel and stainless milling. Suits cutters MECX

    $13.80 inc. GST
    $12.00 ex. GST
    Add to Cart
  • BDMT11 03 02ER-JT PR830

    BDMT11 03 02ER-JT PR830

    BDMT110302ER-JT PR830 High rake for minimum cutting force. PR830 grade and JT chip breaker recommended for steel milling. Suits cutter MEC12-S12-11 only.

    $10.35 inc. GST
    $9.00 ex. GST
    Add to Cart
  • BDMT11T302ER-JT PR1225 (0.2 Corner Radius)

    BDMT11T302ER-JT PR1225 (0.2 Corner Radius)

    BDMT11T308ER-JT PR1225 (0.2mm corner radius) High rake for minimum cutting force. PR1225 grade and JT chip breaker first recommended for steel and stainless milling. Suits cutters MEC 40 50 63mm Face Mill 16mm Ultra Hurricane End Mill 20mm Ultra...

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • BDMT11T304ER-JT PR1225 (0.4 Corner Radius)

    BDMT11T304ER-JT PR1225 (0.4 Corner Radius)

    BDMT11T304ER-JT PR1225 (0.4mm corner radius) High rake for minimum cutting force. PR1225 grade and JT chip breaker first recommended for steel and stainless milling. Suits cutters MEC 16 20 25 40 50 63mm Suits cutters MEC 40 50 63mm Face Mill 16mm...

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • BDMT11T308ER-JT PR1225 (0.8 Corner Radius)

    BDMT11T308ER-JT PR1225 (0.8 Corner Radius)

    BDMT11T308ER-JT PR1225 (0.8mm corner radius) High rake for minimum cutting force. PR1225 grade and JT chip breaker first recommended for steel and stainless milling. Suits cutters MEC 16 20 25 40 50 63mm Suits cutters MEC 40 50 63mm Face Mill 16mm...

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • BDMT11T312ER-JT PR1225 (1.2 Corner Radius)

    BDMT11T312ER-JT PR1225 (1.2 Corner Radius)

    BDMT11T312ER-JT PR1225 (1.2mm corner radius) High rake for minimum cutting force. PR1225 grade and JT chip breaker first recommended for steel and stainless milling. Suits cutters MEC 16 20 25 40 50 63mm Suits cutters MEC 40 50 63mm Face Mill 16mm...

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • BDMT11T316ER-JT PR1225 (1.6 Corner Radius)

    BDMT11T316ER-JT PR1225 (1.6 Corner Radius)

    BDMT11T316ER-JT PR1225 (1.6mm corner radius) High rake for minimum cutting force. PR1225 grade and JT chip breaker first recommended for steel and stainless milling. Suits cutters MEC 16 20 25 40 50 63mm Suits cutters MEC 40 50 63mm Face Mill 16mm...

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • BDMT11T324ER-JT PR830 (2.4 Corner Radius)

    BDMT11T324ER-JT PR830 (2.4 Corner Radius)

    BDMT11T324ER-JT PR830 (2.4mm corner radius) High rake for minimum cutting force. PR830 grade and JT chip breaker recommended for steel milling. Suits cutters MEC 16 20 25 40 50 63mm Some cutters may require slight modification to clear large corner...

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • BDMT170408ER-JT PR1225 (0.8 Corner Radius)

    BDMT170408ER-JT PR1225 (0.8 Corner Radius)

      BDMT17048ER-JT PR1225 (0.8mm corner radius) High rake for minimum cutting force. PR1225 grade and JT chip breaker first recommended for steel and stainless milling.    

    $15.64 inc. GST
    $13.60 ex. GST
    Add to Cart
  • LOGT100408FR-AM

    LOGT100408FR-AM

    LOGT100408FR-AM Milling insert for aluminium with 0.8 corner radius. MEW16-S16-10-2T MEW20-S20-10-3T MEW25-S25-10-3T

    $21.85 inc. GST
    $19.00 ex. GST
    Add to Cart
  • LOMU100408ER-GM PR1525

    LOMU100408ER-GM PR1525

    LOMU100408ER-GM PR1525 Milling insert with 0.8 corner radius. New series double sided 4 edge milling insert from Kyocera. Reduced cutting force quivelent to positive insert but with 4 cutting edges. PR1525 Grade suitable for most steels and stainless...

    $15.87 inc. GST
    $13.80 ex. GST
    Add to Cart
  • LOMU100420ER-GM PR1525

    LOMU100420ER-GM PR1525

    LOMU100408ER-GM PR1525 Milling insert with 2.0 corner radius. New series double sided 4 edge milling insert from Kyocera. Reduced cutting force quivelent to positive insert but with 4 cutting edges. PR1525 Grade suitable for most steels and stainless...

    $15.87 inc. GST
    $13.80 ex. GST
    Add to Cart
  • OFMR070408EN-GT PR830

    OFMR070408EN-GT PR830

    OFMR070408EN-GT PR830 Insert size 17.85mm across flats x 5.14mm thick. Clearance angle 26º Economical 8 corner insert. Suits several brands.          

    $20.70 inc. GST
    $18.00 ex. GST
    Add to Cart
  • OFMT050405ER-SH PR1225

    OFMT050405ER-SH PR1225

    OFMT050405ER-SH P1225 Economical 8 corner insert. High rake for minimum cutting force. PR1225 grade recommended for steel and stainless milling.  Suits cutters MOF45063R-05-5T-M MOF0545R-06305-22.0 63mm 45º Face Mill MOF0545R-05004-22.0 50mm...

    $14.26 inc. GST
    $12.40 ex. GST
    Add to Cart
  • OFMT070408EN-GT PR1225

    OFMT070408EN-GT PR1225

    OFMT070408EN-GT PR1225 Economical 8 corner insert. High rake for minimum cutting force. PR1225 grade recommended for steel and stainless milling. Suits cutters below. MOF45100R-07-6T 100mm Face Mill MOF45125R-07-8T 125mm Face Mill

    $18.17 inc. GST
    $15.80 ex. GST
  • R39011T308-MG

    R39011T308-MG

    R39011T308-MG Milling insert. Suitable for most materials Suits R390 cutters          

    $10.35 inc. GST
    $9.00 ex. GST
    Out of stock
  • R39011T308-MG 10 Pack

    R39011T308-MG 10 Pack

    R39011T308-MG Milling insert pack of 10 Suitable for most materials Suits R390 cutters          

    $92.00 inc. GST
    $80.00 ex. GST
    Add to Cart
  • RPMT10T3M0ER-GM

    RPMT10T3M0ER-GM

    Kyocera RPMT10T3M0ER-GM milling insert. Suits Kyocera MRX cutters

    $10.35 inc. GST
    $9.00 ex. GST
    Add to Cart
  • RPMT1204M0ER-GM

    RPMT1204M0ER-GM

    Kyocera RPMT1204M0ER-GM milling insert. Suits Kyocera MRX cutters

    $14.72 inc. GST
    $12.80 ex. GST
    Add to Cart
  • RPMW1003MOE

    RPMW1003MOE

    RPMW1003MOE milling insert. Suits various cutters/brands Diameter         10mm Thickness        3...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • SEET13T3AGFN-AL Aluminium (R245)

    SEET13T3AGFN-AL Aluminium (R245)

    SEET13T3AGFN-AL (R245) High rake with sharp ground edge for aluminium machining. Suitable for aluminium, plastic and other soft materials. Made by Sumitomo Japan Fits Sandvik R245 and Mitsubishi cutters. 13.4mm square. 4mm thick.

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • SEHT1204AFFN-AL

    SEHT1204AFFN-AL

    SEHT1204AFFN-AL Suitable for aluminium and other nonferrous. Positive rake for smooth cutting action. Suits 45º approach cutters. MILLING CUTTERS 50mm Face Mill 45º Square Insert 63mm Face Mill 45º Square Insert 100mm Face Mill 45º...

    $13.80 inc. GST
    $12.00 ex. GST
    Add to Cart
  • SEKN1204AFTN PR1225

    SEKN1204AFTN PR1225

    SEKN1204AFTN PR1225 12.7mm square x 4.76 thick. Standard ISO milling insert with wiper edge, fits many brands of cutter. Suitable for steel and stainless. Plain chip breaker for stronger edge. Suits 45º approach cutters.

    $13.80 inc. GST
    $12.00 ex. GST
    Add to Cart
  • SEKT1204AFEN-MF (Winstar)

    SEKT1204AFEN-MF (Winstar)

    SEKT1204AFEN-MF-CX32HS Suitable for steel and stainless and iron. Positive rake for smooth cutting action. Suits 45º approach cutters. MILLING CUTTERS 50mm Face Mill 45º Square Insert 63mm Face Mill 45º Square Insert 100mm Face Mill...

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • SEKT1204AFEN-S PR660

    SEKT1204AFEN-S PR660

    SEKT1204AFEN-S PR660 Suitable for steel and stainless. Positive rake for smooth cutting action. Suits 45º approach cutters.  

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • SEMR1203AFSN

    SEMR1203AFSN

    SEMR1203AFSN-RG-CX31NS Standard ISO milling insert with wiper edge, fits many brands of cutter. Same fitting as SEKN1203 and SEKR1203. Suitable for steel and stainless. Suits 45º approach cutters...

    $9.20 inc. GST
    $8.00 ex. GST
    Add to Cart
  • SEMT13T3AGEN-MG (R245)

    SEMT13T3AGEN-MG (R245)

    SEMT13T3AGEN-MG (R245) Suitable for steel and stainless. Fits Sandvik R245 and Mitsubishi cutters among others. 13.4mm square. 4mm thick. 50mm Face mill 63mm Face mill 80mm Face mill 100mm Face mill

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • TCGX16T308-AG Spot Drill Insert

    TCGX16T308-AG Spot Drill Insert

    TCGX16T308-AG Spot Drill Insert for non-ferrouse. Suitable aluminium, plastics and soft materials. Fits DTS Spot Drill

    $29.67 inc. GST
    $25.80 ex. GST
    Add to Cart
  • TPKN1603PDTR PR1225

    TPKN1603PDTR PR1225

    TPKN1603PDTR PR1225 Standard ISO milling insert with wiper edge, fits many brands of cutter. Suitable for steel and stainless. Plain chip breaker for stronger edge.

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • TPKN2204PDTR PR1225

    TPKN2204PDTR PR1225

    TPKN2204PDTR PR1225 Standard ISO milling insert with wiper edge, fits many brands of cutter. Suitable for steel and stainless. Plain chip breaker for stronger edge.

    $20.24 inc. GST
    $17.60 ex. GST
    Out of stock
  • TPKR1603PPR-RG

    TPKR1603PPR-RG

    TPKR1603PPR-RG Standard ISO milling insert with wiper edge, fits many brands of cutter. Suitable for steel and stainless etc.  

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • TPMR1603PDER-H PR1225

    TPMR1603PDER-H PR1225

    TPMR1603PDER-H PR1225 Same as TPKR1603 in other brands. Standard ISO milling insert with wiper edge, fits many brands of cutter. Suitable for steel and stainless. Moulded chip breaker for lower cutting force.

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • TPMR2204PDER-H PR1225

    TPMR2204PDER-H PR1225

    TPMR2204PDER-H PR1225 Same as TPKR2204 in other brands. Standard ISO milling insert with wiper edge, fits many brands of cutter. Suitable for steel and stainless. Moulded chip breaker for lower cutting force.

    $20.24 inc. GST
    $17.60 ex. GST
    Add to Cart