Shop by Category

LATHE INSERTS

  • DCGW11T304 KW10

    DCGW11T304 KW10

    DCGW11T304 KW10 Suitable for cast iron, great for brake lathes. Suits boring bars S16Q-SDUCR-11 16mm BORING BAR S20R-SDUCR-11 20mm BORING BAR S25R-SDUCR-11 25mm BORING BAR S16Q-SDQCR-11 16mm BORING BAR S20R-SDQCR-11 20mm BORING BAR S25R-SDQCR-11 25mm...

    $16.10 inc. GST
    $14.00 ex. GST
    Add to Cart
  • RCMX1204M0 CA5525

    RCMX1204M0 CA5525

    RCMX1204M0 CA5525 Suitable for steel. Round profiling insert 12mm Suits tools. PRXCR2525M-12 BUTTON TOOL  

    $9.20 inc. GST
    $8.00 ex. GST
    Add to Cart
  • TCGX16T308-AG Spot Drill Insert

    TCGX16T308-AG Spot Drill Insert

    TCGX16T308-AG Spot Drill Insert for non-ferrouse. Suitable aluminium, plastics and soft materials. Fits DTS Spot Drill

    $29.67 inc. GST
    $25.80 ex. GST
    Add to Cart
  • TNGA160412 PT600M CERAMIC

    TNGA160412 PT600M CERAMIC

    Ceramic insert for hardened steel and cast iron.   Kyocera Japan. TNGA160412 PT600M Coated (1.2mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) PT600M Coated grade for even higher performance. Suitable for hardened steel. Can...

    $14.26 inc. GST
    $12.40 ex. GST
    Add to Cart
  • TPMT090204 HQ PR1725 (Steel/stainless)

    TPMT090204 HQ PR1725 (Steel/stainless)

    TPMT090204 HQ PR1725 Recommended grade for general machining of stainless steel and steel. Suits boring head bars below, click to view. BORING HEAD BAR 12 x 12 x 45 BORING HEAD BAR 18 x 12 x 53 BORING HEAD BAR 18 x 16 x 68 BORING HEAD BAR 20 x 12 x...

    $7.82 inc. GST
    $6.80 ex. GST
    Add to Cart
  • VBMT110308 HQ CA525 (Steel)

    VBMT110308 HQ CA525 (Steel)

    VBMT110308 HQ CA525Fine to medium machining of steel and stainless.Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions.Depth of cut 0.5~1.5mmFeed 0.1~0.2 mm/revGrade...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • TPMR160308 CA4515 (Cast Iron)

    TPMR160308 CA4515 (Cast Iron)

    TPMR160308 CA4515 The ever popular boring and turning insert. Suitable for all general applications. Positive rake offers low cutting resistance when boring  but also able to withstand large depth of cut.        ...

    $8.74 inc. GST
    $7.60 ex. GST
    Add to Cart
  • ZXMT11T306GM PR1230 10 Pack

    ZXMT11T306GM PR1230 10 Pack

    ZXMT11T306GM PR1230 U-Drill insert. GM general purpose insert for steel. Suits DRX Drills 32-38mm Pack of ten.

    $92.00 inc. GST
    $80.00 ex. GST
    Add to Cart
  • SALE
    GMM4020-040MS TN90 grooving insert 10 pack

    GMM4020-040MS TN90 grooving insert 10 pack

    GMM4020-040MS TN90 grooving insert 10 pack. Suitable for finish machining of steel. Width   4mm Suits Kyocera internal grooving tools.

    Was: $112.70
    Now: $27.60 inc. GST
    Was: $98.00
    Now: $24.00 ex. GST
    Add to Cart
  • SALE
    GMM3020-040MW TN90 grooving insert 10 pack

    GMM3020-040MW TN90 grooving insert 10 pack

    GMM3020-040MW TN90 grooving insert 10 pack. Suitable for finish machining of steel. Width   3mm Suits Kyocera internal grooving tools.

    Was: $101.20
    Now: $27.60 inc. GST
    Was: $88.00
    Now: $24.00 ex. GST
    Add to Cart
  • SALE
    GMM3015-040V TN90 grooving insert 10 pack

    GMM3015-040V TN90 grooving insert 10 pack

    GMM3015-04V TN90 Internal grooving insert 10 pack. Suitable for finish machining of steel. Width   3mm Suits Kyocera internal grooving tools.

    Was: $101.20
    Now: $27.60 inc. GST
    Was: $88.00
    Now: $24.00 ex. GST
    Add to Cart
  • GDM2020N-020PM PR1225 Parting Insert  10 pack

    GDM2020N-020PM PR1225 Parting Insert 10 pack

    Kyocera 2mm parting insert ten pack. GDM2020N-020PM PR1225 Insert size         2mm Cutting edges     2 Grade PR1225 suitable for steel and stainless. PM chip breaker for general parting. Smooth...

    $253.00 inc. GST
    $220.00 ex. GST
    Add to Cart
  • VNMG160404 Steel/Stainless

    VNMG160404 Steel/Stainless

    VNMG160404 CA6525 Medium machining of steel and stainless.    Kyocera Japan. VNMG160404  (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert suitable for medium machining. Cutting...

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • RCGT0602M0-AK (NON FERROUS)

    RCGT0602M0-AK (NON FERROUS)

    RCGT0602M0 AL 6mm diameter Suits tools below   SRACR1010K06 SRACR1212K06 SRACR1616K06 SRACR2020K06 SRACR2525M06  

    $11.04 inc. GST
    $9.60 ex. GST
    Add to Cart
  • CNGA120408 KT66 CERAMIC

    CNGA120408 KT66 CERAMIC

    CNGA120408-T02025 KT66Ceramic insert for hardened steel and high speed machining of cast iron.KT66 Ceramic is able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent...

    $18.17 inc. GST
    $15.80 ex. GST
    Add to Cart
  • TPGN110304 CERAMIC

    TPGN110304 CERAMIC

    TPGN110304Ceramic insert for hardened steel and high speed machining of cast iron.Able to withstand light intermittent cutting in hardened steelsuch as turning pins and bushes with pre drilled oil ways etc.Produces excellent surface finish on hardened...

    $18.40 inc. GST
    $16.00 ex. GST
    Add to Cart
  • DCMT11T304 HQ CA525 (STEEL)

    DCMT11T304 HQ CA525 (STEEL)

    DCMT11T304 HQ CA525 Fine to medium machining of steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.08~0.16 mm/rev Grade information...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • CCMT09T308 HQ CA525 (STEEL)

    CCMT09T308 HQ CA525 (STEEL)

    CCMT09T308 HQ CA525   Medium machining of steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.10~0.25 mm/rev Grade information...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • TPGH080204L PR930

    TPGH080204L PR930

    TPGH090204L PR930 Grade information. PR930   Tough grade for general machining of stainless steel and steel. Fully ground precision boring insert.

    $14.49 inc. GST
    $12.60 ex. GST
    Add to Cart
  • WCMT050308-MM 10 Pack

    WCMT050308-MM 10 Pack

    WCMT050308-MM-CX31NS U-Drill insert. Suites U Drills 25, 26, 27, 28, 29, 30mm

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • WCMT040208-MM 10 Pack

    WCMT040208-MM 10 Pack

    WCMT040208-MM-CX31NS U-Drill insert. Suites U Drills 20, 21, 22, 23, 24mm

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • WCMT030208-MM 10 Pack

    WCMT030208-MM 10 Pack

    WCMT030208-MM-CX31NS U-Drill insert. Suites U Drills 15, 16, 17, 18, 19mm

    $89.70 inc. GST
    $78.00 ex. GST
    Add to Cart
  • TNMG160408 GS CA515 (STEEL)

    TNMG160408 GS CA515 (STEEL)

    Medium machining of steel at high surface speed.    Kyocera Japan. TNMG160408 GS (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert suitable for medium machining of steel at moderate feeds...

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • RCMX1003M0 CA5525

    RCMX1003M0 CA5525

    RCMX1003M0 CA5525 Suitable for steel. Round profiling insert 10mm Suits tools. PRXCR2525M-10 BUTTON TOOL PRXCR2020K-10 BUTTON TOOL

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • Grooving insert 1.25mm for KTGFR tools

    Grooving insert 1.25mm for KTGFR tools

    TGF32R125 Grooving insert. Width               1.25mm Cutting depth    2.0mm Suitable for steel and stainless. Sharp ground for precision grooving. Suits tool type...

    $20.70 inc. GST
    $18.00 ex. GST
    Add to Cart
  • T16IR120 INTERNAL GROOVE INSERT 1.2mm

    T16IR120 INTERNAL GROOVE INSERT 1.2mm

    T16IR120 INTERNAL GROOVE INSERT 1.2mm Suits most brands of threading bar. If used in Sandvik, centre height will be lower as insert is thinner. SINR1616-16 SINR2016-16 SINR2420-16 SINR3025-16 SINR3732-16      

    $15.41 inc. GST
    $13.40 ex. GST
    Add to Cart
  • TBGT060102L

    TBGT060102L

    TBGT060101L  0.2mm Corner radius for fine machining TN60 High wear resistant grade for high speed machining of most materials. Fully ground precision boring insert. Suits boring head bars below. Click to view.  BORING HEAD BAR 18 x 8 x...

    $13.80 inc. GST
    $12.00 ex. GST
  • TNMG160404 TK CA6525 (STAINLESS & STEEL)

    TNMG160404 TK CA6525 (STAINLESS & STEEL)

        Medium machining of stainless and steel.    Kyocera Japan TNMG160404 TK CA6525 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert with positive rake and sharp edge for low cutting...

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • TNMG160408 TK CA6525 (STAINLESS & STEEL)

    TNMG160408 TK CA6525 (STAINLESS & STEEL)

    Medium machining of stainless and steel.    Kyocera Japan TNMG160408 TK CA6525 (0.8mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Good general use insert with positive rake and sharp edge for low cutting force. Excellent...

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • TNMG160404 MS CA6525 (STAINLESS & STEEL)

    TNMG160404 MS CA6525 (STAINLESS & STEEL)

    Medium machining of stainless steel.    Kyocera Japan TNMG160404 MS CA6525 Suits all brands of  turning tools. (ISO) Medium machining of stainless steel. Also good for steel. Good general use insert suitable for light intermittent...

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • Grooving insert 2.0mm for KGBAR

    Grooving insert 2.0mm for KGBAR

    GBA32R200-020 Grooving insert. Width               2.0mm Cutting depth    2.5mm Suitable for steel and stainless. Sharp ground for precision grooving. Suits tool type...

    $20.70 inc. GST
    $18.00 ex. GST
    Add to Cart
  • Grooving insert 1.5mm for KGBAR

    Grooving insert 1.5mm for KGBAR

    GBA32R150-020 PR1115 Grooving insert. Width               1.5mm Cutting depth    2.5mm Suitable for steel and stainless. Sharp ground for precision grooving. Suits tool...

    $20.70 inc. GST
    $18.00 ex. GST
    Add to Cart
  • TNMG160412 PS CA525 (STEEL)

    TNMG160412 PS CA525 (STEEL)

      Medium to rough machining of stainless steel and steel    Kyocera Japan TNMG160412 PS CA525 (1.2mm Corner radius) Suits all brands of  turning tools. (ISO) Strong 1.2mm corner radius. Use for removing bulk material with...

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • Grooving insert 0.50mm for KTGFR tools

    Grooving insert 0.50mm for KTGFR tools

    TGF32R050-010 Grooving insert. Width               0.5mm Cutting depth    2.0mm Suitable for steel and stainless. Sharp ground for precision grooving. Suits tool type...

    $20.70 inc. GST
    $18.00 ex. GST
    Add to Cart
  • RCMT0602M0 LT10

    RCMT0602M0 LT10

    RCMT0602M0 6mm diameter Suits tools SRACR1010K06 SRACR1212K06 SRACR1616K06 SRACR2020K06 SRACR2525K06

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • CCMT09T308 (Cast Iron)

    CCMT09T308     Medium machining of cast iron. Also useful for hard materials. Low cutting force, suitable for light machines. Suits boring bars   S16Q-SCLCR-09 16mm BORING BAR S20R-SCLCR09 20mm BORING BAR S25R-SCLCR09 25mm BORING...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • SNMG120408 PS CA525 (Steel)

    SNMG120408 PS CA525 (Steel)

    SNMG120408 PS CA525 Medium machining of steel. Good general use insert suitable for intermittent cutting. Excellent chip control at relatively low feed rates. Cutting parameters Depth of cut 1.00~3.5mm Feed 0.18~0.35 mm/rev Grade...

    $11.27 inc. GST
    $9.80 ex. GST
    Add to Cart
  • CCGT09T302MP-CK

    CCGT09T302MP-CK

    CCGT09T302MP-CK   Finishing. 0.2mm Nose radius. Super precision insert suitable for fine machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Cutting...

    $18.40 inc. GST
    $16.00 ex. GST
    Add to Cart
  • DCMT11T304 MQ CA6525 (STAINLESS & STEEL)

    DCMT11T304 MQ CA6525 (STAINLESS & STEEL)

    DCMT11T304 MQ CA6525 Fine machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.2~1.0mmFeed 0.05~0.15 mm/rev Grade...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • DCMT11T308 HQ CA525 (STEEL)

    DCMT11T308 HQ CA525 (STEEL)

    DCMT11T308 HQ CA525 Fine to medium machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Recommended cutting conditions. Depth of cut 0.5~2.0mmFeed 0.01~0.25...

    $10.12 inc. GST
    $8.80 ex. GST
    Add to Cart
  • TPMR160308 CA525 (Steel)

    TPMR160308 CA525 (Steel)

    TPMR160308 CA525 The ever popular boring and turning insert. Suitable for all general applications. Positive rake offers low cutting resistance when boring  but also able to withstand large depth of cut.        ...

    $8.74 inc. GST
    $7.60 ex. GST
    Add to Cart
  • TPMR160304 CA525 (Steel)

    TPMR160304 CA525 (Steel)

    TPMR160304 CA525 The ever popular boring and turning insert. Suitable for all general applications. Positive rake offers low cutting resistance when boring  but also able to withstand large depth of cut.        ...

    $8.74 inc. GST
    $7.60 ex. GST
    Add to Cart
  • TNMG160404 HQ CA525 (STEEL)

    TNMG160404 HQ CA525 (STEEL)

      Fine to medium machining of steel.    Kyocera Japan TNMG160404 HQ CA525 (0.4mm CORNER RADIUS) Suits all brands of  turning tools. (ISO) Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light...

    $8.05 inc. GST
    $7.00 ex. GST
    Add to Cart
  • T11IR100 INTERNAL GROOVE INSERT 1mm

    T11IR100 INTERNAL GROOVE INSERT 1mm

    T11IR100 INTERNAL GROOVE INSERT 1mm Suits most brands of threading bar using the small 11mm inserts. Fits out SINR~~~11 bars Threading tools     

    $15.41 inc. GST
    $13.40 ex. GST
    Add to Cart
  • CCGT060202MP-CK

    CCGT060202MP-CK

    CCGT060202MP-CK   Finishing. 0.2mm Nose radius. Super precision insert suitable for fine machining of stainless steel and steel. Excellent chip control at low feed and depth of cut. Low cutting force, suitable for light machines. Cutting...

    $13.80 inc. GST
    $12.00 ex. GST
    Add to Cart
  • VCGX110308 AL (NON FERROUS)

    VCGX110308 AL (NON FERROUS)

    VCGX110308 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart
  • VCGX110304 AL (NON FERROUS)

    VCGX110304 AL (NON FERROUS)

    VCGX110304 AL These inserts are high rake with sharp ground edges and polished top surface.Intended for machining aluminium and plastics but also excellent for fine cuts on almost any material. Many users have found these inserts are well suited tosmall...

    $8.97 inc. GST
    $7.80 ex. GST
    Add to Cart