No.1-72 UNF SERIAL HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.2-64 UNF SERIAL HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.3-56 UNF SERIAL HAND TAP SET MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.4-48 UNF SERIAL HAND TAP SET MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.5-44 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.6-40 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.8-36 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.10-32 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.12-28 UNF SERIAL HAND TAP SET MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/16 UNF HSS HAND TAP SET MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 1/4 UNF HSS HAND TAP SET MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart
5/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 5/16 UNF HSS HAND TAP SET MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart
3/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 3/8 UNF HSS HAND TAP SET MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart
7/16 UNF HSS HAND TAP TAPER MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/16 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 7/16 UNF HSS HAND TAP SET MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart
1/2 UNF HSS HAND TAP TAPER MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/2 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/2 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 1/2 UNF HSS HAND TAP SET MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart
9/16 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 5/8 UNF HSS HAND TAP SET MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart
3/4 UNF HSS HAND TAP TAPER MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/4 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/4 UNF HSS HAND TAP SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP TAPER MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP SET MSRP: Was: Now: $175.95 inc. GST MSRP: Now: $153.00 ex. GST Add to Cart 1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1" UNF HSS HAND TAP TAPER MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1" UNF HSS HAND TAP INTERMEDIATE MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1" UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $65.55 inc. GST MSRP: Now: $57.00 ex. GST Add to Cart 1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1" UNF HSS HAND TAP SET MSRP: Was: Now: $195.50 inc. GST MSRP: Now: $170.00 ex. GST Add to Cart 1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1" x 14 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $128.80 inc. GST MSRP: Now: $112.00 ex. GST Add to Cart 1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1-1/8" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $182.85 inc. GST MSRP: Now: $159.00 ex. GST Add to Cart 1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1-1/4" x 12 TPI UNF HSS SERIAL HAND TAP SET MSRP: Was: Now: $205.85 inc. GST MSRP: Now: $179.00 ex. GST Add to Cart No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.1-72 UNF SERIAL HAND TAP SET No.1-72 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.2-64 UNF SERIAL HAND TAP SET No.2-64 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.3-56 UNF SERIAL HAND TAP SET No.3-56 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $39.10 inc. GST MSRP: Now: $34.00 ex. GST Add to Cart No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.4-48 UNF SERIAL HAND TAP SET No.4-48 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $32.20 inc. GST MSRP: Now: $28.00 ex. GST Out of stock No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.5-44 UNF SERIAL HAND TAP SET No.5-44 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.6-40 UNF SERIAL HAND TAP SET No.6-40 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.8-36 UNF SERIAL HAND TAP SET No.8-36 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.10-32 UNF SERIAL HAND TAP SET No.10-32 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
No.12-28 UNF SERIAL HAND TAP SET No.12-28 UNF 2 Piece serial hand tap set. Serial Tap sets are different to standard hand taps. Designated as Rougher, Intermediate and Finisher, unlike conventional tap sets taper, second and bottom where the difference between each one is the... MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/16 UNF HSS HAND TAP SET 3/16-32 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $31.74 inc. GST MSRP: Now: $27.60 ex. GST Add to Cart 1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/4 UNF HSS HAND TAP TAPER 1/4-28 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/4 UNF HSS HAND TAP INTERMEDIATE 1/4-28 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart 1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/4 UNF HSS HAND TAP BOTTOM 1/4-28 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $11.73 inc. GST MSRP: Now: $10.20 ex. GST Add to Cart SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart 5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 1/4 UNF HSS HAND TAP SET 1/4-28 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $35.19 Now: $28.06 inc. GST MSRP: Was: $30.60 Now: $24.40 ex. GST Add to Cart
5/16 UNF HSS HAND TAP TAPER 5/16-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/16 UNF HSS HAND TAP INTERMEDIATE 5/16-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart 5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/16 UNF HSS HAND TAP BOTTOM 5/16-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $12.65 inc. GST MSRP: Now: $11.00 ex. GST Add to Cart SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart 3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 5/16 UNF HSS HAND TAP SET 5/16-24 UNF HSS HAND TAP SET Includes taper intermediate and bottom taps. MSRP: Was: $37.95 Now: $34.27 inc. GST MSRP: Was: $33.00 Now: $29.80 ex. GST Add to Cart
3/8 UNF HSS HAND TAP TAPER 3/8-24 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/8 UNF HSS HAND TAP INTERMEDIATE 3/8-24 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart 3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/8 UNF HSS HAND TAP BOTTOM 3/8-24 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $13.80 inc. GST MSRP: Now: $12.00 ex. GST Add to Cart SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart 7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 3/8 UNF HSS HAND TAP SET 3/8-24 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $41.40 Now: $37.26 inc. GST MSRP: Was: $36.00 Now: $32.40 ex. GST Add to Cart
7/16 UNF HSS HAND TAP TAPER 7/16-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/16 UNF HSS HAND TAP INTERMEDIATE 7/16-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart 7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/16 UNF HSS HAND TAP BOTTOM 7/16-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $19.55 inc. GST MSRP: Now: $17.00 ex. GST Add to Cart SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 7/16 UNF HSS HAND TAP SET 7/16-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $58.65 Now: $52.90 inc. GST MSRP: Was: $51.00 Now: $46.00 ex. GST Add to Cart
1/2 UNF HSS HAND TAP TAPER 1/2-20 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/2 UNF HSS HAND TAP INTERMEDIATE 1/2-20 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart 1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
1/2 UNF HSS HAND TAP BOTTOM 1/2-20 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $23.00 inc. GST MSRP: Now: $20.00 ex. GST Add to Cart SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart 9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 1/2 UNF HSS HAND TAP SET 1/2-20 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $69.00 Now: $62.10 inc. GST MSRP: Was: $60.00 Now: $54.00 ex. GST Add to Cart
9/16 UNF HSS HAND TAP INTERMEDIATE 9/16-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $27.60 inc. GST MSRP: Now: $24.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/8 UNF HSS HAND TAP TAPER 5/8-18 UNF HSS Hand tap. Taper. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/8 UNF HSS HAND TAP INTERMEDIATE 5/8-18 UNF HSS Hand tap. Intermediate. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart 5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
5/8 UNF HSS HAND TAP BOTTOM 5/8-18 UNF HSS Hand tap. Bottom. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $37.95 inc. GST MSRP: Now: $33.00 ex. GST Add to Cart SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
SALE 5/8 UNF HSS HAND TAP SET 5/8-18 UNF HSS Hand tap set. HSS-G Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: $113.85 Now: $102.35 inc. GST MSRP: Was: $99.00 Now: $89.00 ex. GST Add to Cart
3/4 UNF HSS HAND TAP TAPER 3/4 UNF HSS HAND TAP Taper MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/4 UNF HSS HAND TAP INTERMEDIATE 3/4 UNF HSS HAND TAP Intermediate MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/4 UNF HSS HAND TAP BOTTOM 3/4 UNF HSS HAND TAP BOTTOM MSRP: Was: Now: $48.30 inc. GST MSRP: Now: $42.00 ex. GST Add to Cart 3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
3/4 UNF HSS HAND TAP SET 3/4 UNF HSS HAND TAP 3 PIECE SET MSRP: Was: Now: $144.90 inc. GST MSRP: Now: $126.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP TAPER 7/8-14 UNF HSS Hand tap. Taper. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP INTERMEDIATE 7/8-14 UNF HSS Hand tap. Intermediate. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand MSRP: Was: Now: $58.65 inc. GST MSRP: Now: $51.00 ex. GST Add to Cart 7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
7/8 UNF HSS HAND TAP BOTTOM 7/8-14 UNF HSS Hand tap. Bottom. Application: For general use Non abrasive material up to 900 N/mm² Unalloyed and low alloy steel For through and blind holes For thread cutting by hand
