Product Description
WNMG080404 GS CA5515
Medium to rough machining of steel.
Good general use insert with strong edge suitable for medium machining of steel at moderate feeds. Excellent chip control at low to medium feed rates.
CA5515 for higher speed with light interrupted cutting of steel.
Recommended cutting conditions.
Depth of cut 0.70~3.0mm
Feed 0.15~0.30 mm/rev
Suits turning tools below.
EWLNR2020K-08 Right hand
EWLNR2525M-08 Right hand
EWLNL2020K-08 Left hand
EWLNL2525M-08 Left hand