9/9

Lathe Tooling

In stock
TCGT110204 AG-CX10 (NON FERROUS)
NZ$9.40
TCGT110204 FA-CX10 These inserts are high rake with sharp ground edges and polished top surface....
4.5mm INTERNAL THREAD INSERT 22IR450ISO
NZ$24.00
Out of stock
22IR450ISO 4.5mm FULL PROFILE INTERNAL THREADING INSERT . Standard insert fits most brands. Suitable for...
In stock
T11IR100 INTERNAL GROOVE INSERT 1mm
NZ$13.40
T11IR100 INTERNAL GROOVE INSERT 1mm Suits most brands of threading bar using the small 11mm inserts. Suits...
In stock
DCMT11T308 HQ CA525 (STEEL)
NZ$10.80
DCMT11T308 HQ CA525 Fine to medium machining of stainless steel and steel. Excellent chip...
In stock
SEL2525M-16 EXT THREAD (Left hand)
NZ$89.00
SEl2525M-16 EXTERNAL THREADING TOOL. SHANK          25mm...
In stock
TCGX16T308-AG Spot Drill Insert
NZ$25.80
TCGX16T308-AG Spot Drill Insert for non-ferrous. Suitable aluminium, plastics and soft materials....
In stock
MGEHR2525-3 T10 External Groove Tool 25mm x 3mm
NZ$66.00
MGEHR2525-3 T10 External Groove Tool 25mm x 3mm Groove width      3mm...
In stock
DCMT11T304 HQ CA5515 (STEEL)
NZ$10.80
DCMT11T304 HQ CA5515 Fine to medium machining of steel. Excellent chip control at low feed and...
In stock
S10K-STFCR09 10mm SHANK BORING BAR
NZ$59.00
S10K-STFCR09 10mm shank boring bar. Shank          ...
In stock
CCMT09T304 HQ (STAINLESS & STEEL)
NZ$10.50
CCMT09T304 HQ    Fine to medium machining of steel and stainless steel. Excellent...
In stock
S10K-SDUCR-07 10mm BORING BAR
NZ$59.00
S10K-SDUCR-07 10mm BORING BAR Ideal for internal profiling, back chamfering and under cuts....
TPMT110304 HQ (Stainless and Steel)
NZ$8.80
Out of stock
TPMT110304 HQ First recommended grade for general machining of stainless steel and steel. Suits...
In stock
SCLCL2020K09 20mm tool L/H
NZ$69.00
SCLCL2020K09 Left hand A useful tool for turning and facing. Strong insert shape ....
In stock
T16IR100 INTERNAL GROOVE INSERT 1mm
NZ$13.40
T16IR100 INTERNAL GROOVE INSERT 1mm Suits most brands of threading bar. If used in Sandvik, centre height...
In stock
4.5mm EXTERNAL THREAD INSERT 22ER450ISO
NZ$24.00
22ER450ISO 4.5mm EXTERNAL THREADING INSERT . Full profile insert 4.5mm Pitch. Standard insert fits most...
In stock
TCGT16T304-FA (NON FERROUS)
NZ$12.40
TCGT16T304-FA  (NON FERROUS) These inserts are high rake with sharp ground edges and polished top...
SVVBN1212K-11 Neutral
NZ$45.00
Out of stock
SVVBN1212K-11 Neutral Neutral positive rake tool for general turning and profiling. Screw...
In stock
A12X-SCLCR-06 12mm BORING BAR (Through coolant)
NZ$69.00
A12X-SCLCR-06 A useful bar for boring and facing with through coolant. Strong insert shape ....
In stock
MGEHR2525-4 External Groove Tool 25mm x 4mm
NZ$66.00
MGEHR2525-4 External Groove Tool 20mm x 4mm Groove width      4mm...
SER2525M-22 EXT THREAD (echain)
NZ$96.00
Out of stock
SER2525M-22 EXTERNAL THREADING TOOL. Shank          25mm...
In stock
5.0mm INTERNAL THREAD INSERT 22IR500ISO
NZ$24.00
22IR500ISO 5.0mm FULL PROFILE INTERNAL THREADING INSERT . Standard insert fits most brands. Suitable for...
In stock
WNMG080408 PG CA525 (STEEL)
NZ$9.90
WNMG080408 PG CA525 Medium machining of   steel, suitable for intermittent cutting....
In stock
ZXMT11T306GM PR1230 10 Pack
NZ$80.00
ZXMT11T306GM PR1230 U-Drill insert. GM general purpose insert for steel. Suits DRX Drills 32-38mm...
In stock
TCGT110204 FG (Finishing)
NZ$12.90
TCGT110204 FG CX1060 High rake and ground cutting edge for fine machining in most materials....
In stock
SDJCR1010K-07 Right hand
NZ$45.00
SDJCR1010K-07 Right hand 10mm SHANK 125mm LONG Spare Screw    CS-25 Insert...
In stock
Micro Boring Bar 3mm
NZ$18.80
Solid carbide micro boring bar 3mm MQR-3-R0.15-L15 Minimum bore 3mm ...
In stock
SDNCN1010K-07 (Neutral)
NZ$45.00
SDNCN1010K-07 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of...
In stock
Micro Boring Bar 4mm
NZ$18.80
Solid carbide micro boring bar 4mm MQR-4-R0.15-L15 Minimum bore   4mm ...
In stock
S10K-SDQCR-07 10mm BORING BAR
NZ$59.00
S10K-SDQCR-07 10mm BORING BAR Ideal for internal profiling, back chamfering and under cuts....
In stock
Micro Boring Bar 5mm
NZ$24.60
Solid carbide micro boring bar. 5mm MQR-5-R0.20-L22  Minimum bore   5mm ...
SDJCL1010K-07 Left hand
NZ$45.00
Out of stock
SDJCL1010K-07 Left hand 10mm SHANK 125mm LONG Spare Screw    CS-25 Insert...
In stock
Micro Boring Bar 6mm
NZ$28.00
Solid carbide micro boring bar. 6mm  Minimum bore   6mm ...
In stock
TCMT16T304 HQ CA5525
NZ$9.80
TCMT16T304 HQ CA5525 Fine to medium machining of steel. Excellent chip control at low feed and...
In stock
DCMT11T308 HQ CA5515 (STEEL)
NZ$10.80
DCMT11T308 HQ CA5515 Fine to medium machining of steel.  Excellent chip control at low feed and depth...
In stock
CCMT09T304 HQ CA5515 (STEEL)
NZ$10.50
CCMT09T304 HQ CA5515   Fine to medium machining of steel. Excellent chip control at...
In stock
TCGT16T308-FA (NON FERROUS)
NZ$12.40
TCGT16T308-FA These inserts are high rake with sharp ground edges and polished top surface. Intended...
In stock
PARTING BLADE 3mm x 32mm KTKB32-3S
NZ$97.00
Kyocera 32mm x 3mm part off blade KTKB32-3S. Parting blades fit all standard blocks. Inserts fit...
In stock
KTNR2525M-16 EXT THREAD (Kyocera)
NZ$179.00
KTNR2525M-16 EXTERNAL THREADING TOOL. Shank          25mm...
In stock
VBMT160404 HQ CA6525 (Steel/Stainless)
NZ$14.00
VBMT160404 HQ CA6525 Fine to medium machining of steel and stainless. Excellent chip control at low feed...
In stock
TPMT110308 HQ CA6525
NZ$7.00
TPMT110308 HQ CA6525 CA6525 First recommended grade for general machining of stainless steel and...
In stock
5.0mm EXTERNAL THREAD INSERT 22ER500ISO
NZ$24.00
22ER5000ISO 5mm EXTERNAL THREADING INSERT . Full profile insert 5mm Pitch. Standard insert fits most...
In stock
6.00mm INTERNAL THREAD INSERT 22IR600ISO
NZ$24.00
22IR600ISO 6mm FULL PROFILE INTERNAL THREADING INSERT . Standard insert fits most brands. Suitable for...
In stock
14 Whitworth EXTERNAL THREAD INSERT 16ER14W
NZ$15.00
14WW EXTERNAL THREAD INSERT. 16ER11W-TF PR1115 Standard insert fits most brands with the exception of...
In stock
T16IR120 INTERNAL GROOVE INSERT 1.2mm
NZ$13.40
T16IR120 INTERNAL GROOVE INSERT 1.2mm Suits most brands of threading bar. If used in Sandvik, centre height...
In stock
A12M-SCLCR06 12mm Through Coolant
NZ$78.00
A12M-SCLCR06 A useful bar for boring and facing with through coolant. Strong insert shape ....
In stock
ZCMT12T306 PR1025 10 Pack
NZ$128.00
ZCMT12T306 PR1025 U-Drill insert. GM general purpose insert for steel. Suits DRX Drill...
In stock
SCLCR2525M09 25mm tool
NZ$79.00
SCLCR2525M09 A useful tool for turning and facing. Strong insert shape ....
In stock
T16IR150 INTERNAL GROOVE INSERT 1.5mm
NZ$13.40
T16IR150 INTERNAL GROOVE INSERT 1.5mm Suits most brands of threading bar. If used in Sandvik, centre height...
In stock
KTNR2525M-22 EXT THREAD (Kyocera)
NZ$197.00
KTNR2525M-22 EXTERNAL THREADING TOOL. Shank          25mm...
In stock
CCMT09T308 HQ CA525 (STEEL)
NZ$10.50
CCMT09T308 HQ CA525   Medium machining of steel. Excellent chip control at low feed and...
In stock
TCMT16T308 HQ CA5525
NZ$9.80
TCMT16T308 HQ CA5525 Fine to medium machining of steel. Excellent chip control at low feed and...
In stock
S12M-SDUCR-07 12mm BORING BAR
NZ$66.00
S12M-SDUCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts....
In stock
PARTING BLADE 4mm x 32mm KTKB32-4S
NZ$97.00
Kyocera 32mm x 4mm part off blade KTKB32-4S. Parting blades fit all standard blocks. Inserts fit...
In stock
CCMT09T308 HQ (STAINLESS & STEEL)
NZ$10.50
CCMT09T308 HQ    Fine to medium machining of stainless steel and steel. Excellent...
In stock
SDJCR1212K-11 Right hand
NZ$45.00
SDJCR1212K-11 Right hand 12mm SHANK 125mm LONG Spare Screw    CS-35...
In stock
S12M-SCLCR09 12mm BORING BAR
NZ$66.00
S12M-SCLCR09 A useful bar for boring and internal facing. Strong insert shape ....
In stock
6.0mm EXTERNAL THREAD INSERT 22ER600ISO
NZ$24.00
22ER6000ISO 6mm EXTERNAL THREADING INSERT . Full profile insert 6mm Pitch. Standard insert fits most...
In stock
T16ER100 EXTERNAL GROOVE INSERT 1.0mm
NZ$13.40
T16ER100 EXTERNAL GROOVE INSERT 1.0mm Suits most brands of threading tool. If used in Sandvik, centre...
In stock
VBMT160404 HQ CA6515 (Steel/Stainless)
NZ$14.00
VBMT160404 HQ CA6515 Fine to medium machining of steel and stainless. Excellent chip control at low feed...
In stock
11 Whitworth EXTERNAL THREAD INSERT 16ER11W
NZ$15.00
11WW EXTERNAL THREAD INSERT. 16ER11W-TF PR1115 Standard insert fits most brands with the exception of...
In stock
S12L-CTUPR09-16 12mm
NZ$126.00
12mm KYOCERA TPMR BORING BAR. S12L-CTUPR09-16 Shank size      12mm...
In stock
WNMG080408 PS CA525 (STEEL)
NZ$9.90
WNMG080408 PS CA525 Medium machining of   steel. General use insert suitable for...
In stock
TPGH110304L
NZ$8.00
TPGH110304L PR930 (0.4 CORNER RADIUS) Grade information. Tough grade for general machining of most...
In stock
S12M-STFCR09 12mm SHANK BORING BAR
NZ$66.00
S12M-STFCR09 12mm Boring bar Shank           12mm...
In stock
SDNCN1212K-11 (Neutral)
NZ$45.00
SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of...
In stock
SDJCL1212K-11 Left hand
NZ$45.00
SDJCL1212K-11 Left hand 12mm SHANK 125mm LONG Spare Screw    CS-35 Insert...
In stock
S12M-STFCR11 12mm SHANK BORING BAR
NZ$66.00
S12M-STFCR11 12mm Boring bar Shank           12mm...
PARTING BLADE 5mm x 32mm KTKB32-5S
NZ$108.00
Out of stock
Kyocera 32mm x 5mm part off blade KTKB32-5S.  Parting blades fit all standard blocks.  Inserts fit...
In stock
S12M-SDQCR-07 12mm BORING BAR
NZ$66.00
S12M-SDQCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts....
In stock
S12M-SDUCL-07 12mm BORING BAR LEFT HAND
NZ$45.00
S12M-SDUCL-07 BORING BAR LEFT HAND Ideal for internal profiling, back chamfering and under cuts....
In stock
TCMT16T312 HQ CA5525
NZ$9.80
TCMT16T312 HQ CA5525 Fine to medium machining of steel. Excellent chip control at low feed and...
In stock
CCMT09T308 HQ CA515 (STEEL)
NZ$10.50
CCMT09T308 HQ CA515   Fine to medium machining of steel. Excellent chip control at low...
In stock
1.00mm INTERNAL THREAD INSERT 11IR-100-ISO
NZ$13.40
11IR-100-ISO INTERNAL THREADING INSERT 1.0mm FULL PROFILE Standard insert fits most brands. ...
In stock
T16ER120 EXTERNAL GROOVE INSERT 1.2mm
NZ$13.40
T16ER120 EXTERNAL GROOVE INSERT 1.2mm Suits most brands of threading tool. If used in Sandvik, centre...
In stock
S12M-SCLCL09 12mm Left hand
NZ$66.00
S12M-SCLCL09 Left hand A useful bar for boring and facing. Strong insert shape ....
In stock
WNMG080404 PS CA6525 (STAINLESS & STEEL)
NZ$9.90
WNMG080404 PS CA6525 Medium machining of stainless steel and steel. Good general use insert...
In stock
TNGG160408R-A3 KW10 (NON FERROUS)
NZ$11.80
  Machining of aluminium and plastic. Kyocera Japan. TNGG160408R-A3 KW10 (0.8mm CORNER RADIUS)...
In stock
SNR0005H-06
NZ$59.00
SNR0005H-06 Right hand threading bar. 12mm Shank 100mm Long 6.4mm Minimum bore...
In stock
TNGG160404L-A3 KW10 (NON FERROUS)
NZ$11.80
  Machining of aluminium and plastic.    Kyocera Japan. TNGG160404L-A3 KW10 (0.4mm...
In stock
WNMG080408 PS CA6525 (STAINLESS & STEEL)
NZ$9.90
WNMG080408 PS CA6525 Medium machining of stainless steel and steel. Good general use insert...
In stock
TCMT16T304 HQ CA5515
NZ$9.80
TCMT16T304 HQ CA5515 Fine to medium machining of steel. Excellent chip control at low feed and...
In stock
VBMT160408 HQ CA6525 (Steel/Stainless)
NZ$14.00
VBMT160408 HQ CA6525 Fine to medium machining of steel and stainless. Excellent chip control at low feed...
In stock
1.25mm INTERNAL THREAD INSERT 11IR-125-ISO
NZ$13.40
11IR-125-ISO INTERNAL THREADING INSERT 1.25mm FULL PROFILE Standard insert fits most brands.   ...
In stock
T16ER150 EXTERNAL GROOVE INSERT 1.5mm
NZ$13.40
T16ER150 EXTERNAL GROOVE INSERT 1.5mm Suits most brands of threading tool. If used in Sandvik, centre...
In stock
SNR0008K-08
NZ$59.00
SNR0008K-08 Right hand threading bar. 16mm Shank 125mm Long 9mm Minimum bore diameter...
In stock
TNMG160404 AH (NON FERROUS)
NZ$10.00
Roughing aluminium and other soft materials.   Kyocera Japan. TNMG160404 AH (0.4mm CORNER...
In stock
CCMT09T304 PP (Finishing)
NZ$10.50
CCMT09T304 PP PV720  Finishing. 0.4mm Nose radius. Fine machining of steel and stainless...
In stock
S14M-SCLCR09 14mm BORING BAR
NZ$66.00
S14M-SCLCR09 A useful ""in between size"" bar for boring and internal facing. Strong...
In stock
DCGW11T304 KW10
NZ$16.00
DCGW11T304 KW10 Suitable for cast iron, great for brake lathes. Suits boring bars...
In stock
TNMG160408 AH (NON FERROUS)
NZ$10.00
Roughing aluminium and other soft materials.   Kyocera Japan. TNMG160408 AH (0.8mm CORNER...
In stock
S16Q-SCLCR-06 16mm BORING BAR
NZ$69.00
S16Q-SCLCR06 A useful bar for boring and facing. Strong insert shape ....
In stock
WNMG080408 PS CA5515 (STEEL)
NZ$9.90
WNMG080408 PS CA5515 Medium machining of   steel. Good general use insert suitable for...
In stock
TCMT16T308 HQ CA5515
NZ$9.80
TCMT16T308 HQ CA5515 Fine to medium machining of steel. Excellent chip control at low feed and...
1.50mm INTERNAL THREAD INSERT 11IR-150-ISO
NZ$15.00
Out of stock
11IR-150-ISO INTERNAL THREADING INSERT 1.50mm FULL PROFILE Standard insert fits most brands.   ...
In stock
PARTING TOOL BLOCK 16 x 26
NZ$95.00
Parting blade holder to suit 26mm blade Fits all standard blades, all brands. Shank height 16mm...
In stock
TPGH110308L PR930
NZ$14.80
TPGH110308L PR930 (0.8 CORNER RADIUS) Grade information. PR930   Tough grade for general...
In stock
VBMT160408 HQ CA6515 (Steel/Stainless)
NZ$14.00
VBMT160408 HQ CA6515 Fine to medium machining of stainless steel and steel. Excellent chip control at...
In stock
CCGT09T302MP-CK
NZ$19.00
CCGT09T302MP-CK   Finishing. 0.2mm Nose radius. Super precision insert suitable for fine...
In stock
WNMG080408 ZS CA4515 (CAST IRON)
NZ$9.90
WNMG080408 ZS CA4515 Medium to rough machining of cast iron. CA4515 For high speed machining...
In stock
S16Q-STFCR11 16mm SHANK BORING BAR
NZ$69.00
S16Q-STFCR11 16mm Boring bar Shank           16mm...
In stock
PARTING TOOL BLOCK 20 x 26
NZ$95.00
Parting blade holder to suit 26mm blade Fits all standard blades Shank height 20mm Tip...
In stock
S16N-CTUPR11-20 16mm
NZ$137.00
16mm KYOCERA TPMR BORING BAR. S16N-CTUPR11-20 Shank size      16mm...
In stock
S16Q-SDUCR-11 16mm BORING BAR
NZ$69.00
S16Q-SDUCR-11 BORING BAR Ideal for internal profiling, back chamfering and under cuts....
TPMT160304 HQ CA6525
NZ$11.80
Out of stock
TPMT160304 HQ CA6525  CA6525 First recommended grade for general machining of stainless steel and...
In stock
SDJCR1616K-11 Right hand
NZ$49.00
SDJCR1616K-11 Right hand 16mm SHANK 125mm LONG Spare Screw    CS-35...
In stock
S16Q-SCLCL-06 16mm Left hand
NZ$69.00
S16Q-SCLCL06 Left hand A useful bar for boring and facing. Strong insert shape ....
CCMT09T308 (Cast Iron)
NZ$10.50
Out of stock
CCMT09T308    CA4515 Medium machining of cast iron. Also useful for hard...
In stock
TCGT16T304 FG (Finishing)
NZ$13.60
TCGT16T304 FG CX1060 High rake and ground cutting edge for fine machining in most materials....
In stock
SDNCN1616K-11 (Neutral)
NZ$49.00
SDNCN1212K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of...
In stock
SDJCL1616K-11 Left hand
NZ$49.00
SDJCL1616K-11 Left hand 16mm SHANK 125mm LONG Spare Screw    CS-35...
In stock
SINR-1616-16
NZ$75.00
SINR-1616-16 Right hand threading bar to suit 16IR threading inserts. (Insert not included) 16mm...
In stock
S16Q-SDQCR-11 16mm BORING BAR
NZ$69.00
S16Q-SDQCR-11 BORING BAR Ideal for internal profiling, back chamfering and under cuts....
In stock
S16Q-SDUCR-07 16mm BORING BAR
NZ$66.00
S16Q-SDUCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts....
In stock
S16Q-SDQCR-07 16mm BORING BAR
NZ$69.00
S16Q-SDQCR-07 BORING BAR Ideal for internal profiling, back chamfering and under cuts....
In stock
S16Q-SCLCR-09 16mm BORING BAR
NZ$69.00
S16Q-SCLCR09 A useful bar for boring and facing. Strong insert shape ....
In stock
PARTING TOOL BLOCK 20 x 32
NZ$129.00
Parting blade holder to suit 32mm blade Fits all standard blades Shank height 20mm Tip...
In stock
SINR-2016-16
NZ$89.00
SINR-2016-16 Right hand threading bar to suit 16IR threading inserts. (Insert not included)...
In stock
TPMT160308 HQ CA6525
NZ$11.80
TPMT160308 HQ CA6525    CA6525 First recommended grade for general machining of stainless steel and...
In stock
WNMG080412 ZS CA4515 (CAST IRON)
NZ$9.90
WNMG080412 ZS CA4515 Kyocera's latest cast iron grade. Medium to rough machining of cast iron....
In stock
VCGX110304 AL (NON FERROUS)
NZ$7.80
VCGX110304 AL These inserts are high rake with sharp ground edges and polished top surface....
In stock
TCGT16T308 FG (Finishing)
NZ$13.60
TCGT16T308 FB CX1060 High rake and ground cutting edge for fine machining in most materials....
In stock
CCGT09T304L-F
NZ$9.00
CCGT09T304L-F   Finishing. 0.4mm Nose radius. Suitable for fine machining of stainless steel, steel...
In stock
SINL-2016-16 Left hand
NZ$89.00
SINL-2016-16 Left hand threading bar to suit 16IL threading inserts. 16mm Shank 150mm Long 20mm...
In stock
PARTING TOOL BLOCK 25 x 32
NZ$129.00
Parting blade holder to suit 32mm blade Fits all standard blades Shank height 25mm Tip...
In stock
SINR-2420-16
NZ$110.00
SINR-2420-16 Right hand threading bar to suit 16IR threading inserts. 20mm Shank 180mm...
In stock
S16Q-SCLCL-09 16mm Left hand
NZ$69.00
S16Q-SCLCL09 Left hand A useful bar for boring and facing. Strong insert shape ....
In stock
VCGX110308 AL (NON FERROUS)
NZ$7.80
VCGX110308 AL These inserts are high rake with sharp ground edges and polished top surface. Intended...
In stock
CCGT09T304R-F
NZ$9.00
CCGT09T304R-F   Finishing. 0.4mm Nose radius. Suitable for fine machining of stainless steel, steel and...
In stock
SINR-3025-16
NZ$139.00
SINR-3025-16   Right hand threading bar to 16IR threading inserts. 25mm Shank 200mm...
In stock
VCGT160404 AG-CX10 (NON FERROUS)
NZ$13.80
VCGT160404 AG-CX10 These inserts are high rake with sharp ground edges and polished top surface....
SINR-3025-22 (Large insert)
NZ$149.00
Out of stock
SINR-3025-22 Right hand threading bar to suit 22 IR threading inserts. 25mm Shank...
In stock
VBMT110304 HQ CA6525 (Steel/Stainless)
NZ$10.80
VBMT110304 HQ CA6525 Fine to medium machining of steel and stainless. Excellent chip control at low feed and...
In stock
A16Q-SCLCR-09 16mm Through Coolant
NZ$85.00
A16Q-SCLCR09 A useful bar for boring and facing with through coolant. Strong insert shape ....
In stock
SINR-3732-16
NZ$229.00
SINR-3732-16   Right hand threading bar to 16IR threading inserts. 32mm Shank 250mm...
In stock
VCGT160408 AL (NON FERROUS)
NZ$13.80
VCGT160408 AL These inserts are high rake with sharp ground edges and polished top surface. Intended...
In stock
S20R-STFCR11 20mm SHANK BORING BAR
NZ$76.00
S20R-STFCR11 20mm Boring bar Shank           20mm...
In stock
S20Q CTUPR11-27 20mm
NZ$195.00
20mm KYOCERA TPMR BORING BAR. S20Q CTUPR11-27 Shank size      20mm...
In stock
S20R-SDUCR-11 20mm BORING BAR
NZ$79.00
S20R-SDUCR-1 1 BORING BAR Ideal for internal profiling, back chamfering,  under cuts and...
In stock
SDJCR2020K-11 Right hand
NZ$69.00
SDJCR2020K-11 20mm SHANK 125mm LONG Spare Screw    CS-35 Insert not...
In stock
SINR-3732-22 (Large insert)
NZ$239.00
SINR-3732-22 Right hand threading bar to suit 22 IR threading inserts. 32mm Shank...
In stock
S18Q-SCLCR-09 18mm BORING BAR
NZ$76.00
S18Q-SCLCR09 A useful in between size bar for boring and internal facing. Can also be...
In stock
Grooving insert 0.50mm for KTGFR tools
NZ$18.00
TGF32R050-010 Grooving insert. Width               0.5mm Cutting depth    2.0mm Suitable for steel and...
In stock
VBMT110308 HQ CA525 (Steel)
NZ$10.80
VBMT110308 HQ CA525 Fine to medium machining of steel and stainless. Excellent chip control at low feed and...
In stock
SDNCN2020K-11 (Neutral)
NZ$69.00
SDNCN2020K-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of...
In stock
Micro Threading Bar 3mm
NZ$22.00
Solid carbide micro threading bar. 3mm MIR-3-A60-L15 Minimum bore    3mm...
SDJCL2020K-11 Left hand
NZ$69.00
Out of stock
SDJCL2020K-11 Left hand 20mm SHANK 125mm LONG Spare Screw    CS-35...
In stock
Micro Threading Bar 4mm
NZ$22.00
Solid carbide micro threading bar. 4mm MIR-4-A60-L15 Minimum bore    4mm...
In stock
S20R-STFCR16 20mm SHANK BORING BAR
NZ$76.00
S20R-STFCR16 20mm Boring bar Note, this bar suits the larger TCMT16 insert....
In stock
Grooving insert 0.75mm for KTGFR tools
NZ$18.00
TGF32R075-010 Grooving insert. Width               0.75mm Cutting depth    2.0mm Suitable for steel and...
In stock
S20R-SDQCR-11 20mm BORING BAR
NZ$79.00
S20R-SDQCR-1 1 BORING BAR Ideal for internal profiling, back chamfering,  under cuts and...
In stock
Micro Threading Bar 5mm
NZ$24.00
Solid carbide micro threading bar. 5mm MIR-5-A60-L22 Minimum bore    5mm...
In stock
Micro Threading Bar 6mm
NZ$28.00
Solid carbide micro threading bar. 6mm MIR-6-A60-L22 Minimum bore    6mm...
In stock
Micro Threading Bar 8mm
NZ$45.00
Solid carbide micro threading bar 60° 8mm MIR-8-A60-L30 Minimum bore  8mm...
In stock
Groove tool 16mm shank KTGFR
NZ$58.00
KTGFR1616H-16 Circlip tool or shallow groove tool. Shank      16mm Tip height  16mm Length       125mm...
In stock
S18Q-SCLCL-09 18mm Left hand
NZ$76.00
S18Q-SCLCL-09 18mm Left hand Can be used for boring large diameters when mounted horizontally...
In stock
Grooving insert 1.0mm for KTGFR tools
NZ$18.00
TGF32R100-010 Grooving insert. Width               1.0mm Cutting depth    2.0mm Suitable for steel and...
In stock
Grooving insert 1.20mm for KTGFR tools
NZ$18.00
TGF32R120 Grooving insert. Width               1.20mm Cutting depth    2.0mm Suitable for steel and...
In stock
S20R-SCLCR09 20mm BORING BAR
NZ$79.00
S20R-SCLCR09 A useful bar for boring and facing. Strong insert shape ....
Groove tool 20mm shank KTGFR
NZ$98.00
Out of stock
KTGFR2020K-16 Circlip tool or shallow groove tool. Shank      20mm Height      20mm Length     125mm...
In stock
Grooving insert 1.25mm for KTGFR tools
NZ$18.00
TGF32R125 Grooving insert. Width               1.25mm Cutting depth    2.0mm Suitable for steel and...
In stock
Grooving insert 1.5mm for KTGFR tools
NZ$18.00
TGF32R150 Grooving insert. Width               1.5mm Cutting depth    2.0mm Suitable for steel and...
In stock
Grooving insert 2.0mm for KTGFR tools
NZ$18.00
TGF32R200 Grooving insert. Width               2.0mm Cutting depth    2.0mm Suitable for steel and...
In stock
Groove tool 25mm shank KTGFR
NZ$74.00
KTGFR2525M-16 Circlip tool or shallow groove tool. Shank      25mm Height      25mm Length     150mm...
In stock
S20R-SCLCL-09 20mm Left hand
NZ$76.00
S20R-SCLCL-09 20mm Left hand Can be used for boring large diameters when mounted...
In stock
Grooving insert 2.5mm for KTGFR tools
NZ$18.00
TGF32R250 Grooving insert. Width               2.5mm Cutting depth    2.5mm Suitable for steel and...
In stock
Grooving insert 3mm for KTGFR tools
NZ$18.00
TGF32R300 Grooving insert. Width               3mm Cutting depth    3mm Suitable for steel and stainless....
In stock
A20R-SCLCR09 20mm Through Coolant
NZ$92.00
A20R-SCLCR09 A useful bar for boring and facing with through coolant. Strong insert shape ....
In stock
S25R-STFCR16 25mm SHANK BORING BAR
NZ$89.00
  S25R-STFCR16 Shank           25mm...
In stock
S25R-SCLCR09 25mm BORING BAR
NZ$89.00
S25R-SCLCR09 A useful bar for boring and facing. Strong insert shape ....
In stock
S25X-CTUPR16-34 25mm
NZ$215.00
25mm Kyocera TPMR BORING BAR. S25X-CTUPR16-34 Shank size      25mm...
In stock
S25R-SDUCR-11 25mm BORING BAR
NZ$89.00
S20R-SDUCR-1 1 BORING BAR Ideal for internal profiling, back chamfering,  under cuts and...
In stock
SDJCR2525M-11 Right hand
NZ$79.00
SDJCR2525M-11 25mm SHANK 150mm LONG Spare Screw    CS-35 Insert not...
In stock
SDNCN2525M-11 (Neutral)
NZ$79.00
SDNCN2525M-11 (Neutral) Useful tool for profiling. Can be used to cut 55º threads (With a bit of...
In stock
SDJCL2525M-11 Left hand
NZ$79.00
SDJCL2525M-11 Left hand 25mm SHANK 150mm LONG Spare Screw    CS-35...
In stock
S25S-STFCR16 25mm SHANK BORING BAR
NZ$110.00
S25S-STFCR16 Shank           25mm...
In stock
S25T-ETUNR16 (25mm x 300mm)
NZ$139.00
S25T-ETUNR16 Takes economical 6 edge insert....
In stock
S25R-SDQCR-11 25mm BORING BAR
NZ$89.00
S20R-SDQCR-1 1 BORING BAR Ideal for internal profiling, back chamfering,  under cuts and...
In stock
A25R-SCLCR09 25mm Through Coolant
NZ$105.00
A25R-SCLCR09 A useful bar for boring and facing with through coolant. Strong insert shape...
In stock
S32S-SCLCR09 32mm BORING BAR
NZ$179.00
S32S-SCLCR09 A useful bar for boring and facing. Strong insert shape ....
In stock
Micro Grooving Bar 3 x 0.7mm
NZ$28.00
Solid carbide micro grooving bar. 3mm x 0.7 MGR-3-B0.7-L10 Minimum bore   3mm...
In stock
Micro Grooving Bar 4 x 1mm
NZ$28.00
Solid carbide micro grooving bar. 4mm MGR-4-B1-L10 Minimum bore   4mm...
In stock
Micro Grooving Bar 5 x 1mm
NZ$28.00
Solid carbide micro grooving bar. 5mm MGR-5-B1-L22 Minimum bore   5mm...
In stock
Micro Grooving Bar 5 x 2mm
NZ$28.00
Solid carbide micro grooving bar. 5mm MGR-5-B2-L22 Minimum bore   5mm...
In stock
Micro Grooving Bar 6 x 1mm
NZ$28.00
Solid carbide micro grooving bar. 6mm  MGR-6-B1-L22  Minimum bore   6mm ...
In stock
Micro Grooving Bar 6 x 2mm
NZ$28.00
Solid carbide micro grooving bar. 6mm  MGR-6-B2-L22  Minimum bore   6mm ...
In stock
S32S-CTUPR16-43 32mm
NZ$236.00
32mm KYOCERA TPMR BORING BAR. S32S-CTUPR16-43 Shank size      32mm...
S32T-STFCR16 32mm SHANK BORING BAR
NZ$189.00
Out of stock
S32T-STFCR16 Shank           32mm...
In stock
S32S-ETUNR16 (32mm x 250mm)
NZ$193.00
S32S-ETUNR16 32mm BORING BAR Takes economical 6 edge insert....
In stock
S32U-ETUNR16 (32mm x 350mm)
NZ$258.00
S32U-ETUNR16 32mm BORING BAR Takes economical 6 edge insert....
In stock
S40X-CTUPR16-50 40mm
NZ$289.00
40mm KYOCERA TPMR BORING BAR. S40X-CTUPR16-50 Shank size      40mm...
In stock
S40W-ETUNR16 (40mm x 450mm)
NZ$374.00
Shipping to NZ only. Overseas customers please ask for shipping cost. S40W-ETUNR16 40mm BORING BAR...
In stock
Micro Face Grooving Bar 6mm x 1mm
NZ$28.00
Solid carbide micro Face grooving bar. 6mm x 1mm MFR-6-B1.0-L22...
Show another 10 products

Turing tools boring bars etc