9/9

CARBIDE END MILLS

1 item(s)
Thread Milling Cutter M6 x 1.0 - THREAD MILL at Carbidenz
Thread Milling Cutter M6 x 1.0
NZ$155.00 NZ$92.00 +GST
1 item(s)
Thread Milling Cutter M8 x 1.25 - THREAD MILL at Carbidenz
Thread Milling Cutter M8 x 1.25
NZ$165.00 NZ$112.00 +GST
2 item(s)
Thread Milling Cutter M10 x 1.50 - THREAD MILL at Carbidenz
Thread Milling Cutter M10 x 1.50
NZ$203.00 NZ$143.00 +GST
2 item(s)
Thread Milling Cutter M12 x 1.75 - THREAD MILL at Carbidenz
Thread Milling Cutter M12 x 1.75
NZ$231.00 NZ$163.00 +GST
2 item(s)
7 Piece carbide end mill set - 4 FLUTE CARBIDE E/M at Carbidenz
7 Piece carbide end mill set
NZ$378.00 NZ$302.40 +GST
8 item(s)
Thread Milling Cutter M8 x 1.25 ECO - THREAD MILL at Carbidenz
Thread Milling Cutter M8 x 1.25 ECO
NZ$145.00 NZ$115.00 +GST
4 item(s)
Thread Milling Cutter M10 x 1.50 ECO - THREAD MILL at Carbidenz
Thread Milling Cutter M10 x 1.50 ECO
NZ$146.00 NZ$94.00 +GST
7 item(s)
0.5mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
0.5mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$31.00 +GST
6 item(s)
0.5mm 2 FLUTE CARBIDE BALL ENDMILL - BALL END CARBIDE at Carbidenz
0.5mm 2 FLUTE CARBIDE BALL ENDMILL
NZ$36.00 +GST
7 item(s)
1mm LONG REACH 2 FLUTE END MILL WJ - LONG CARBIDE E/M at Carbidenz
1mm LONG REACH 2 FLUTE END MILL WJ
NZ$64.00 NZ$34.00 +GST
23 item(s)
0.75mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
0.75mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$31.00 +GST
13 item(s)
1mm CARBIDE ENDMILL 3mm SHANK - 4 FLUTE CARBIDE E/M at Carbidenz
1mm CARBIDE ENDMILL 3mm SHANK
NZ$26.00 +GST
16 item(s)
1mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL - ALUMINIUM E/M at Carbidenz
1mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL
NZ$28.00 +GST
12 item(s)
1mm 2 FLUTE CARBIDE BALL ENDMILL - BALL END CARBIDE at Carbidenz
1mm 2 FLUTE CARBIDE BALL ENDMILL
NZ$28.00 +GST
5 item(s)
1mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
1mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$33.00 +GST
7 item(s)
CARBIDE ENDMILL 1mm 3 FLUTE Winstar - 3 FLUTE CARBIDE E/M at Carbidenz
CARBIDE ENDMILL 1mm 3 FLUTE Winstar
NZ$28.00 +GST
11 item(s)
1mm CARBIDE ENDMILL 4mm SHANK - 4 FLUTE CARBIDE E/M at Carbidenz
1mm CARBIDE ENDMILL 4mm SHANK
NZ$26.00 +GST
1 item(s)
1mm Ball end mill for aluminium (USA) 373-2010 - ALUMINIUM BALL E/M at Carbidenz
1mm Ball end mill for aluminium (USA) 373-2010
NZ$53.00 NZ$48.00 +GST
18 item(s)
HARD CUT BALL END MILL 1mm - BALL END CARBIDE at Carbidenz
HARD CUT BALL END MILL 1mm
NZ$33.00 +GST
10 item(s)
1mm x .2mm CORNER RADIUS CARBIDE ENDMILL (Winstar) - CORNER RADIUS E/M at Carbidenz
1mm x .2mm CORNER RADIUS CARBIDE ENDMILL (Winstar)
NZ$28.00 +GST
16 item(s)
CARBIDE SLOT DRILL 1mm x 4mm SHANK - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE SLOT DRILL 1mm x 4mm SHANK
NZ$27.00 +GST
6 item(s)
1mm x 3mm Router (Winstar) - SINGLE FLUTE ROUTERS at Carbidenz
1mm x 3mm Router (Winstar)
NZ$35.40 +GST
12 item(s)
1mm ALUMINIUM BALL END MILL (Winstar) - ALUMINIUM BALL E/M at Carbidenz
1mm ALUMINIUM BALL END MILL (Winstar)
NZ$28.00 +GST
6 item(s)
1.5mm 2 FLUTE CARBIDE BALL ENDMILL - BALL END CARBIDE at Carbidenz
1.5mm 2 FLUTE CARBIDE BALL ENDMILL
NZ$28.00 +GST
1 item(s)
1mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL WJ - ALUMINIUM E/M at Carbidenz
1mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL WJ
NZ$28.00 +GST
10 item(s)
1mm CARBIDE ENDMILL (eco) - 4 FLUTE CARBIDE E/M at Carbidenz
1mm CARBIDE ENDMILL (eco)
NZ$23.00 +GST
8 item(s)
STUB LENGTH CARBIDE SLOT DRILL 1.0mm - 2 FLUTE CARBIDE E/M at Carbidenz
STUB LENGTH CARBIDE SLOT DRILL 1.0mm
NZ$32.00 +GST
1 item(s)
1.5mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL - ALUMINIUM E/M at Carbidenz
1.5mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL
NZ$28.00 +GST
19 item(s)
CARBIDE ENDMILL 1.5mm 3 FLUTE - 3 FLUTE CARBIDE E/M at Carbidenz
CARBIDE ENDMILL 1.5mm 3 FLUTE
NZ$28.00 +GST
8 item(s)
1.5mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
1.5mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$43.00 +GST
13 item(s)
CARBIDE SLOT DRILL 1.5mm x 4mm SHANK - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE SLOT DRILL 1.5mm x 4mm SHANK
NZ$27.00 +GST
17 item(s)
1.5mm CARBIDE ENDMILL 4mm SHANK - 4 FLUTE CARBIDE E/M at Carbidenz
1.5mm CARBIDE ENDMILL 4mm SHANK
NZ$26.00 +GST
14 item(s)
HARD CUT BALL END MILL 1.5mm - BALL END CARBIDE at Carbidenz
HARD CUT BALL END MILL 1.5mm
NZ$38.00 +GST
9 item(s)
1.5mm CARBIDE ENDMILL 3mm SHANK - 4 FLUTE CARBIDE E/M at Carbidenz
1.5mm CARBIDE ENDMILL 3mm SHANK
NZ$26.00 +GST
8 item(s)
STUB LENGTH CARBIDE SLOT DRILL 1.5mm - 2 FLUTE CARBIDE E/M at Carbidenz
STUB LENGTH CARBIDE SLOT DRILL 1.5mm
NZ$28.00 +GST
9 item(s)
2mm CARBIDE ENDMILL 3MM SHANK(Winstar) - 4 FLUTE CARBIDE E/M at Carbidenz
2mm CARBIDE ENDMILL 3MM SHANK(Winstar)
NZ$26.00 +GST
9 item(s)
2mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL - ALUMINIUM E/M at Carbidenz
2mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL
NZ$28.00 +GST
3 item(s)
2mm x .2mm CORNER RADIUS CARBIDE ENDMILL (Winstar) - CORNER RADIUS E/M at Carbidenz
2mm x .2mm CORNER RADIUS CARBIDE ENDMILL (Winstar)
NZ$30.00 +GST
5 item(s)
2mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
2mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$43.00 +GST
14 item(s)
CARBIDE ENDMILL 2mm 3 FLUTE - 3 FLUTE CARBIDE E/M at Carbidenz
CARBIDE ENDMILL 2mm 3 FLUTE
NZ$28.00 +GST
27 item(s)
CARBIDE SLOT DRILL 2.0mm x 4mm SHANK - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE SLOT DRILL 2.0mm x 4mm SHANK
NZ$27.00 +GST
6 item(s)
2mm CARBIDE ENDMILL 4MM SHANK(Winstar) - 4 FLUTE CARBIDE E/M at Carbidenz
2mm CARBIDE ENDMILL 4MM SHANK(Winstar)
NZ$26.00 +GST
12 item(s)
2mm Long series carbide end mill (Winstar) - LONG CARBIDE E/M at Carbidenz
2mm Long series carbide end mill (Winstar)
NZ$40.00 +GST
7 item(s)
2mm 2 FLUTE CARBIDE BALL ENDMILL - BALL END CARBIDE at Carbidenz
2mm 2 FLUTE CARBIDE BALL ENDMILL
NZ$28.00 +GST
7 item(s)
2mm x 6mm Router (Winstar) - SINGLE FLUTE ROUTERS at Carbidenz
2mm x 6mm Router (Winstar)
NZ$35.40 +GST
19 item(s)
2mm ALUMINIUM BALL END MILL (Winstar) - ALUMINIUM BALL E/M at Carbidenz
2mm ALUMINIUM BALL END MILL (Winstar)
NZ$28.00 +GST
17 item(s)
2mm 4 FLUTE CARBIDE BALL ENDMILL - BALL END CARBIDE at Carbidenz
2mm 4 FLUTE CARBIDE BALL ENDMILL
NZ$32.00 +GST
9 item(s)
2mm CARBIDE ENDMILL (eco) - 4 FLUTE CARBIDE E/M at Carbidenz
2mm CARBIDE ENDMILL (eco)
NZ$23.00 +GST
5 item(s)
STUB LENGTH CARBIDE SLOT DRILL 2.0mm - 2 FLUTE CARBIDE E/M at Carbidenz
STUB LENGTH CARBIDE SLOT DRILL 2.0mm
NZ$28.00 +GST
19 item(s)
HARD CUT BALL END MILL 2mm 2 FLUTE - BALL END CARBIDE at Carbidenz
HARD CUT BALL END MILL 2mm 2 FLUTE
NZ$33.00 +GST
9 item(s)
2mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) 8MM SHANK - CORNER ROUNDING E/M at Carbidenz
2mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) 8MM SHANK
NZ$59.00 +GST
14 item(s)
2.5mm 2 FLUTE CARBIDE BALL ENDMILL (Winstar) - BALL END CARBIDE at Carbidenz
2.5mm 2 FLUTE CARBIDE BALL ENDMILL (Winstar)
NZ$28.00 +GST
3 item(s)
2.5mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL - ALUMINIUM E/M at Carbidenz
2.5mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL
NZ$28.00 +GST
10 item(s)
2.5mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
2.5mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$43.00 +GST
5 item(s)
CARBIDE SLOT DRILL 2.5mm x 4mm SHANK - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE SLOT DRILL 2.5mm x 4mm SHANK
NZ$27.00 +GST
17 item(s)
CARBIDE ENDMILL 2.5mm 3 FLUTE - 3 FLUTE CARBIDE E/M at Carbidenz
CARBIDE ENDMILL 2.5mm 3 FLUTE
NZ$28.00 +GST
9 item(s)
HARD CUT BALL END MILL 2.5mm - BALL END CARBIDE at Carbidenz
HARD CUT BALL END MILL 2.5mm
NZ$33.00 +GST
8 item(s)
2.5mm CARBIDE ENDMILL (Winstar) - 4 FLUTE CARBIDE E/M at Carbidenz
2.5mm CARBIDE ENDMILL (Winstar)
NZ$26.00 +GST
9 item(s)
3mm 3 Flute Long Series Aluminium (eco) - LONG ALUMINIUM E/M at Carbidenz
3mm 3 Flute Long Series Aluminium (eco)
NZ$23.00 +GST
13 item(s)
3mm x .2mm CORNER RADIUS CARBIDE ENDMILL - CORNER RADIUS E/M at Carbidenz
3mm x .2mm CORNER RADIUS CARBIDE ENDMILL
NZ$33.00 +GST
6 item(s)
STUB LENGTH CARBIDE SLOT DRILL 2.5mm - 2 FLUTE CARBIDE E/M at Carbidenz
STUB LENGTH CARBIDE SLOT DRILL 2.5mm
NZ$28.00 +GST
8 item(s)
3mm x .5mm CORNER RADIUS CARBIDE ENDMILL - CORNER RADIUS E/M at Carbidenz
3mm x .5mm CORNER RADIUS CARBIDE ENDMILL
NZ$33.00 +GST
1 item(s)
3mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL - ALUMINIUM E/M at Carbidenz
3mm 2 FLUTE CARBIDE ALUMINIUM ENDMILL
NZ$28.00 +GST
9 item(s)
3mm CARBIDE ENDMILL x 3mm Shank (Winstar) - 4 FLUTE CARBIDE E/M at Carbidenz
3mm CARBIDE ENDMILL x 3mm Shank (Winstar)
NZ$26.00 +GST
4 item(s)
3mm 3 Flute Long Series Aluminium - LONG ALUMINIUM E/M at Carbidenz
3mm 3 Flute Long Series Aluminium
NZ$38.00 +GST
5 item(s)
3mm 3 FLUTE CARBIDE ALUMINIUM ENDMILL (4MM SHANK) - ALUMINIUM E/M at Carbidenz
3mm 3 FLUTE CARBIDE ALUMINIUM ENDMILL (4MM SHANK)
NZ$33.00 +GST
2 item(s)
3mm CARBIDE RADIUS CUTTER (REFLEX CUTTER) - CORNER ROUNDING E/M at Carbidenz
3mm CARBIDE RADIUS CUTTER (REFLEX CUTTER)
NZ$84.00 +GST
10 item(s)
3mm Long series carbide end mill (Winstar) - LONG CARBIDE E/M at Carbidenz
3mm Long series carbide end mill (Winstar)
NZ$52.00 +GST
10 item(s)
CARBIDE ENDMILL 3mm 3 FLUTE - 3 FLUTE CARBIDE E/M at Carbidenz
CARBIDE ENDMILL 3mm 3 FLUTE
NZ$28.00 +GST
10 item(s)
3mm 4 FLUTE CARBIDE BALL ENDMILL - BALL END CARBIDE at Carbidenz
3mm 4 FLUTE CARBIDE BALL ENDMILL
NZ$32.00 +GST
14 item(s)
CARBIDE SLOT DRILL 3mm x 3mm Shank - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE SLOT DRILL 3mm x 3mm Shank
NZ$27.00 +GST
2 item(s)
3mm x 0.5mm RADIUS HARD CUT CARBIDE END MILL (eco) - CORNER RADIUS E/M at Carbidenz
3mm x 0.5mm RADIUS HARD CUT CARBIDE END MILL (eco)
NZ$33.00 +GST
7 item(s)
3mm 2 FLUTE CARBIDE BALL ENDMILL (Winstar) - BALL END CARBIDE at Carbidenz
3mm 2 FLUTE CARBIDE BALL ENDMILL (Winstar)
NZ$28.00 +GST
13 item(s)
HARD CUT BALL END MILL 3mm - BALL END CARBIDE at Carbidenz
HARD CUT BALL END MILL 3mm
NZ$33.00 +GST
5 item(s)
3mm x .5mm HARD CUT CORNER RADIUS CARBIDE END MILL (Winstar) - CORNER RADIUS E/M at Carbidenz
3mm x .5mm HARD CUT CORNER RADIUS CARBIDE END MILL (Winstar)
NZ$37.00 +GST
6 item(s)
3mm x 9mm Router (Winstar) - SINGLE FLUTE ROUTERS at Carbidenz
3mm x 9mm Router (Winstar)
NZ$35.40 +GST
19 item(s)
3mm ALUMINIUM BALL END MILL (Winstar) - ALUMINIUM BALL E/M at Carbidenz
3mm ALUMINIUM BALL END MILL (Winstar)
NZ$28.00 +GST
17 item(s)
3mm 2 Flute Long Series Aluminium - LONG ALUMINIUM E/M at Carbidenz
3mm 2 Flute Long Series Aluminium
NZ$35.00 +GST
13 item(s)
3mm 3 FLUTE CARBIDE ALUMINIUM ENDMILL (3MM SHANK) - ALUMINIUM E/M at Carbidenz
3mm 3 FLUTE CARBIDE ALUMINIUM ENDMILL (3MM SHANK)
NZ$28.00 +GST
9 item(s)
3mm 4 FLUTE CARBIDE BALL ENDMILL (APEX CARBIDE) - BALL END CARBIDE at Carbidenz
3mm 4 FLUTE CARBIDE BALL ENDMILL (APEX CARBIDE)
NZ$28.00 +GST
20 item(s)
3mm CARBIDE ENDMILL x 4mm Shank (Winstar) - 4 FLUTE CARBIDE E/M at Carbidenz
3mm CARBIDE ENDMILL x 4mm Shank (Winstar)
NZ$26.00 +GST
19 item(s)
CARBIDE SLOT DRILL 3mm x 4mm SHANK - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE SLOT DRILL 3mm x 4mm SHANK
NZ$27.00 +GST
8 item(s)
3mm x .2mm LONG HARD CUT CARBIDE END MILL (eco) - CORNER RADIUS E/M at Carbidenz
3mm x .2mm LONG HARD CUT CARBIDE END MILL (eco)
NZ$48.00 +GST
8 item(s)
3mm Hard Cut 2 Flute Ball (Winstar) - BALL END CARBIDE at Carbidenz
3mm Hard Cut 2 Flute Ball (Winstar)
NZ$37.00 +GST
7 item(s)
3mm 3 FLUTE CARBIDE ALUMINIUM ENDMILL (eco) - ALUMINIUM E/M at Carbidenz
3mm 3 FLUTE CARBIDE ALUMINIUM ENDMILL (eco)
NZ$28.00 +GST
13 item(s)
3mm CARBIDE ENDMILL x 6mm Shank (Winstar) - 4 FLUTE CARBIDE E/M at Carbidenz
3mm CARBIDE ENDMILL x 6mm Shank (Winstar)
NZ$29.00 +GST
7 item(s)
3mm CARBIDE END MILL (Stainless and steel) V530 - 4 FLUTE CARBIDE E/M at Carbidenz
3mm CARBIDE END MILL (Stainless and steel) V530
NZ$39.00 +GST
10 item(s)
STUB LENGTH CARBIDE SLOT DRILL 3.0mm - 2 FLUTE CARBIDE E/M at Carbidenz
STUB LENGTH CARBIDE SLOT DRILL 3.0mm
NZ$30.00 +GST
22 item(s)
3mm HARD CUT CARBIDE END MILL (eco) - 4 FLUTE CARBIDE E/M at Carbidenz
3mm HARD CUT CARBIDE END MILL (eco)
NZ$29.00 +GST
9 item(s)
2mm HARD CUT CARBIDE END MILL (eco) - 4 FLUTE CARBIDE E/M at Carbidenz
2mm HARD CUT CARBIDE END MILL (eco)
NZ$29.00 +GST
10 item(s)
1mm HARD CUT CARBIDE END MILL (eco) - 4 FLUTE CARBIDE E/M at Carbidenz
1mm HARD CUT CARBIDE END MILL (eco)
NZ$29.00 +GST
7 item(s)
4mm x .2mm CORNER RADIUS CARBIDE ENDMILL (Winstar) - CORNER RADIUS E/M at Carbidenz
4mm x .2mm CORNER RADIUS CARBIDE ENDMILL (Winstar)
NZ$33.00 +GST
2 item(s)
3mm CARBIDE ENDMILL (eco) - 4 FLUTE CARBIDE E/M at Carbidenz
3mm CARBIDE ENDMILL (eco)
NZ$23.00 +GST
6 item(s)
CARBIDE HARD CUT SLOT DRILL 3mm - 2 FLUTE CARBIDE E/M at Carbidenz
CARBIDE HARD CUT SLOT DRILL 3mm
NZ$39.00 +GST
12 item(s)
4mm 3 Flute Long Series Aluminium (eco) - LONG ALUMINIUM E/M at Carbidenz
4mm 3 Flute Long Series Aluminium (eco)
NZ$23.00 +GST
13 item(s)
4mm CARBIDE ENDMILL 4mm SHANK - 4 FLUTE CARBIDE E/M at Carbidenz
4mm CARBIDE ENDMILL 4mm SHANK
NZ$39.00 +GST
Show another 96 products
 
Bestsellers